Barrels - Terrain/Scatter (DND / TTRPG)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Some simple barrels for DND and TTRPG games. I've got a single barrel then a set of 3 and 5 on their sides. I also…
- Rating
- 0 / 5
- Likes
- 48
- Downloads
- 253
- Makes
- 0
- Views
- 432
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
Some simple barrels for DND and TTRPG games. I've got a single barrel then a set of 3 and 5 on their sides. I also skewed the single to be 30mm wide by 40mm tall as a wine vat (for anyone doing the winery in curse of strahd this may be helpful for you!!)
After some review - I've added some larger variants here a 28mm version which would work out to about 6ft tall. It's maybe too big but ends up being more sizeable scatter. Additionally I've added a 70mm variant and a hollow version of it (with an optional lid) - I went through the effort of cleaning up the overhanging faces on the 70mm variants so that they don't need supports. At some point I may revisit the stacks and make them 28mm stacks but we'll seee about that later.
Models that don't need to be printed with supports:
- barrel.17mm.stl
- barrel-base.28mm.stl
- barrel-base.70mm.stl (inc hollow and the lid versions) - note too that the lid version has a bit larger rim on the bottom
The 70mm hollow version saves a bit of material and print time - in exchange for maybe more painting that needs to be done. It's maybe only a 30% reduction tho and if printed at 0.2mm or greater with only a little infill (5-8%) the savings might not be worth it.