Stealth Press flush-cooling pin punch holder mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a flush-cooling pin punch holder for the Stealth Press 1S by IconicFAB.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 10
- Makes
- 0
- Views
- 169
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a flush-cooling pin punch holder for the Stealth Press 1S by IconicFAB.
under some conditions, insert move up after setting them with the stealth press. This AddOn fixes a pin punc next to your soldering and can be moved down when the insert is still hot to coll it down and keep it flush with the part surface.
I used a 8mm pin punch with the length of 150 mm. It weill be fixed by two M3 grub screws (of using inserts for that :-) )
The inner carriage will be kept up with a spring. I used a simple RC Damper spring (e.g. from Tamiya) with an outer diameter of max 17mm.