Volvo EX30 Front Hole Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cover for screw holes of the front license plate adapter.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 50
- Makes
- 0
- Views
- 421
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
If you swap the original front license plate adapter for a smaller one (e.g. for Switzerland, as Swiss front license plates are smaller than in the rest of the EU), you might want to cover up the mounting holes.
For the license plate adapter, follow this link.
Snaps into place and mimics the ridge design for the front part. I've also added a flat version, in case you have issues printing the overhangs.
Printed in PETG-HF on a P1P.
Printing Instructions
⚠ Important: Note that the file is not symmetrical, as the upper hole plug is slightly off center. After loading the file into the slicer you should clone it once and flip the clone along the X axis.