Counting matching models…
This is a cover to get rid of the harman kardon emblem reflection in the windshield (but still make the h/k logo slightly visible). I printed it out of TPU on top of blue painters tape, which gave it a matte surface finish (and it…
This clip is a replacement to the original clip from Rituals which clamps onto the plastic bars on the back of the Rituals car freshener holder. The other side can be places into the car relatively wide and deep ventilation vents of the…
hi, Since I'm driving the Volvo EX30 I'm getting crazy from the alarm for looking tired or looking to the infotainment screen for too long. So after hours of searching for a solution I finally found one, when you place this cover as far…
A cover to place over the Harman Kardon logo on the soundbar of the Volvo EX30. This helps to prevent the highly reflection that comes with the standard logo from the factory. Gently push the cover to fit tight. No other materials are…
The Front Inlay needs to be printed as two separate parts in order to fit through the narrow opening of the Center Console. The Back Inlay is for 2 € coins on the left, 1 € in the middle and 50 cents on the right side. The Slots can be…
Simple almost friction fit end cap for the rails on both the driver and passenger seats. Hoping it will prevent the collection of dirt and dust simplifying cleaning.
I made this blocker for the driver sensor since it keeps annoying me and not functioning properly. The goal was also to make it easily attachable and removable. It requires the steeringwheel to be pulled out a bit since the sensor will…
EN Small tool to keep the frunk lid open on the Volvo EX30. Simply attach as shown in the photo and slide to the height of the hinge if necessary. DE Kleines Hilfsmittel um den Frunkdeckel am Volvo EX30 offen zu halten. Einfach wie im…
Adapter for Bosch PEX300 and PEX400 orbital sander. Tight fit, might fit other Bosch sanders as well if they have the same connector. The design is off center to achieve a larger distance of the hose to the work piece, make sure to attach…
Universal Garmin Navi Halter besonders für Etrex 30 und kompatible Modelle. Die Befestigung erfolgt mit einem Velcroband - passt also auf alle Fahrradlenker.
Print it out of for example PETG. It will withstand heat pretty well and can flex quite a bit when attaching it to the sunvisor. You might want to add some brims depending on how well your buildplate sticks. It's important to keep the…
Update: 3/11/24 this works as Begode EX30 stand! It works even better than for the T4. Who knows?!? Remixed the Veteran Sherman stand to fit the Begode T4. I widened the width for easy roll in and added bumpers which should be printed in…
Priline TPU .20mm Strength Profile 6 shells, 6 bottom / top layers Gyroid Infill, 25%
Simple battery bumpers that use the side screws for the battery mounts (makes it for easier installation). Please remix it to improve protection or any other need. This was just a rough draft for low profile and simple protection. The…
This is a custom-designed trash bin for the removable insert of the Volvo EX30 center console . It fits precisely into the compartment without the need for adhesives or modifications. This solution adds practical waste disposal without…
I printed this with the back of the seat on the build plate 3 layers for floor, walls, and top 14% Gyroid 95A TPU Velcro to attach.
It may work on the Master, and other Begode wheels. Replaces the stock flimsy metal sheet that Begode uses for a fender. I'm still new to 3D printing and this is my first design. Please share any tips if you're knowledgeable and see room…
Simple card hoder that fits nicely in the existing smartphone slot
The Volvo EX30 Chargeport has no light. Connecting the charger cable at night can be challenging. As a light source, I'm using a standard LED light that costs about 2.20 euros. The light fits into the holder, and the Velcro attaches the…
Simple addition of a handle that is also hopefully aesthetically pleasing.
First of all, dry your TPU filament… Otherwise the surface finish will be like my photos. Anywho: I made this protective case for the EX30's Key Tag, since I don't want to scratch the hell out of it when I toss in into my pocket. It is…
I designed this simple adapter so that I could connect my shopvac to my orbital sander. It fits the profile of the sanding platform as well as the connecting pipe, giving a very solid and snug fit. The hose connection is 35 millimeters,…
Light mount replacement to mount the taillight onto the EX30 after installing third party linkages (i.e. https://www.etsy.com/au/listing/1546093084/euc-t4-custom-suspension-dog-bones-dxf) The model should be printed in TPU and printed…
The Volvo EX30 has a huge front license plate holder as standard. This is far too large, for example, for the Swiss license plates. As Volvo has decided to fix the holder with 5 screws, the holes are unfortunately visible without the…
Swiss front license plates (30 x 8 cm) are smaller than in the rest of the EU, so the front looks kind of ridiculous due to the stock license plate adapter. The redesigned adapter works similar to the original but is sized appropriately.…
Print from the top on the bed. Manual supports only needed for the tiny cutouts. Connects with stock screws. EDIT: Added long version made for use with EMA linkage.
If you swap the original front license plate adapter for a smaller one (e.g. for Switzerland, as Swiss front license plates are smaller than in the rest of the EU), you might want to cover up the mounting holes. For the license plate…
The volvo ex30 and ex90 have a key card and a proximity key, but volvo would have you use the card over the proximity key despite the fact that the card comes with many drawbacks: it is a card, it has no lanyard or keyholder it is a card…
Holds wireless phone charger - the ones with the screw on collet clamp, I included a picture of the listing I used, but really any similar one should work. The ball piece can either be superglued or screwed (four 4-40 ½" or M3 12mm) onto…
I printed this in TPU. It works really well as a lift point. Print it with the main handle down to avoid the need for supports.
This is a remote holder for a 2025 Volvo EX30. This model and year is all this has currently been tested with, unknown if other years' remotes will fit. Photos are TPU, .2 layers. This could probably use a little more tweaking to the…
Volvo EX30 console coaster. Print in TPU. Work in progress.
Remix of the original model to: Add additional vertical spacing Reduce the space on both the left and right hand side Mirror along X-Axis (which appears to be the more correct orientation) Tested on Volvo EX30 wireless charging pad and…
The Varia RTL715 car radar mount for the Begode EX30. Also works as a rear handle. Functional but doesn't look the greatest. Feel free to remix to improve on it.
This shades the instrument cluster to see lights better in bright daylight. Adhere with good double-sided tape. Print in ABS or PETG, NOT PLA. Set any depth by just scaling in Z. Use raft.
Swiss front license plates (30 x 8 cm) are smaller than in the rest of the EU, so the front looks kind of ridiculous due to the stock license plate adapter. The redesigned adapter works similar to the original but is sized appropriately.…
The Volvo EX30 Chargeport has no light. Connecting the charger cable at night can be challenging. As a light source, I'm using a standard LED light that costs about 2.20 euros. The light fits into the holder, and the Velcro attaches the…
A cover to place over the Harman Kardon logo on the soundbar of the Volvo EX30. This helps to prevent the highly reflection that comes with the standard logo from the factory. Gently push the cover to fit tight. No other materials are…
Cover for Volvo EX30 keycard with a possibility to add a keyring. No screws needed but fitment could be tight, depening how you have calibrated your filament. Glue can be used to make sure parts wont come apart when not wanted. TPU could…
The EX30 headlight is decent, but it's narrow. During night rides, you just don't see enough of your surroundings. Therefore I replaced it with an aftermarket light that is much wider and just as bright if not brighter. This is the…
These are two extrusion profiles. One hexagonal and one triangular. They can be used for non cubic frames. As I could not find hex aluminum profile model, I decide to design it, using dimensions I found on internet. The request for a…
