Volvo EX30 Swiss Front License Plate Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A better looking option to mount Swiss front license plates as they are smaller than the EU standard size.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 63
- Makes
- 0
- Views
- 526
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Swiss front license plates (30 x 8 cm) are smaller than in the rest of the EU, so the front looks kind of ridiculous due to the stock license plate adapter.
The redesigned adapter works similar to the original but is sized appropriately. It can be mounted with the middle screw of the original, no modifications of the front required.
The stock adapter is screwed into the front with 5 screws. Using this adapter will leave 4 holes visible, which can be covered with this cover.
You can reuse the screws that came with the number plate frame to mount that on the new adapter. It's a standard M6 thread modeled into the design.
Printing Instructions
I had the best results printing it standing up on the top (see photo 5). It just fits diagonally on the P1 print bed, however make sure you angle it so it does not interfere with the front left corner which seems to be a protected area.
For optimal results I recommend tree (auto) supports with the option "On build plate only" enabled. For extra strength select 3 wall loops and Gyroid infill.