1 / 5
Volvo EX30 Swiss Front License Plate Adapter — zdjęcie 1
1 / 5

Volvo EX30 Swiss Front License Plate Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A better looking option to mount Swiss front license plates as they are smaller than the EU standard size.

Ocena
0 / 5
Polubienia
2
Pobrania
63
Wydruki
0
Wyświetlenia
526
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

Swiss front license plates (30 x 8 cm) are smaller than in the rest of the EU, so the front looks kind of ridiculous due to the stock license plate adapter.

The redesigned adapter works similar to the original but is sized appropriately. It can be mounted with the middle screw of the original, no modifications of the front required.

The stock adapter is screwed into the front with 5 screws. Using this adapter will leave 4 holes visible, which can be covered with this cover.

You can reuse the screws that came with the number plate frame to mount that on the new adapter. It's a standard M6 thread modeled into the design.

Printing Instructions

I had the best results printing it standing up on the top (see photo 5). It just fits diagonally on the P1 print bed, however make sure you angle it so it does not interfere with the front left corner which seems to be a protected area. 

For optimal results I recommend tree (auto) supports with the option "On build plate only" enabled. For extra strength select 3 wall loops and Gyroid infill.

Tagi