1 / 4
fanatec f1 stye brake mod
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
want a better feeling and looking brake pedal for your fanatec CSL brake pedal? then download the files and try.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 10
- Makes
- 0
- Views
- 165
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
installation
to install, you must remove the original brake pedal, and then insert 2 M2.5 20mm bolts through the holes of the pedal faceplate and the pedal arm, you must then place the washer and then tighten the nut on the end.
Items needed
2x M2.5 20mm bolts
2x m2.5 nuts
1x brake pedal faceplate
2x 3d printed washers
Add-ons
you can also buy some anti-slip tape and install this on the face along with a rubber cut out on the sides.
Original initial model design from @jiri_603192