Portafilter Skadis Dock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Portafilter Skadis Holder is a mount designed to easily secure a portafilter onto an IKEA Skadis panel.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 59
- Makes
- 0
- Views
- 256
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Portafilter Skadis Dock
Before getting started, I’d like to thank @ThatCoffeeNerd for their help and the picture.
The Portafilter Skadis Holder is a mount designed to easily attach a portafilter (58mm) to an IKEA Skadis pegboard. Ideal for coffee enthusiasts and home baristas, this holder allows you to neatly store your portafilter while keeping it within easy reach.
The first model is for a Flair 58 portafilter. I will try to update the model for other portafilters.
I’ve also added a screw-on model for those who don’t have a Skadis panel.
Printing configuration:
- Layer height: 0.2 mm (a good balance between quality and speed).
- Orientation: Place the flat side against the build plate for better adhesion.
- Supports: Enable supports only for the hook to avoid problematic overhangs.
- Infill: 20-30% Grid or Gyroid for a good balance between strength and filament usage.
- Perimeters: 3 walls to reinforce the structure, especially around the hook.
- Material: PLA for easy printing, PETG for extra durability, especially if holding a heavy portafilter.
With these settings, you should get a clean and functional print. 😊