1 / 5
openBulletFeeder - 6.5 Creedmoor Collator Plate
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
6.5 Creedmoor Plate. Collating these very long boat tail 6.5mm are a challenge, they like to ride above, angle your…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 43
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
6.5 Creedmoor Plate. Collating these very long boat tail 6.5mm are a challenge, they like to ride above, angle your feeder at 45 Degrees, the more in the collator, the better the result.
You will need to use my Flip plate/s for the nose down bullets. https://www.thingiverse.com/thing:3547193
- 0.2 layer
- 0.4 nozzle
- 4 Side perimeters
- 3 top/bottom perimeters
- 20% Infill
Bullet Collator Files https://www.thingiverse.com/thing:4140331
Print Settings
Supports:
No
Resolution:
0.2
20%
Filament: SUNLU PETG
Category: DIY