1 / 20
Gürtelhalterung Taschenlampe // Torch belt holder — image 1
1 / 20

Gürtelhalterung Taschenlampe // Torch belt holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Eine Gürtelhalterung für eine Taschenlampe mit den Durchmessern 40mm (Kopf), 27mm (Schaft) und 150mm Höhe.

Rating
0 / 5
Likes
2
Downloads
29
Makes
0
Views
193
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Deutsch

Eine Taschenlampenhalterung, designed für die FENIX C7, sollte jedoch auch mit anderen Taschenlampen mit ähnlichen Maßen funktionieren (Durchmessern 40mm (Kopf), 27mm (Schaft), 150mm Höhe). Gemacht, um die Taschenlampe problemlos am Gürtel zu tragen und sie um 360° zu drehen.  Die Gürtelschlaufe ist auf einen 40mm breiten Gürtel ausgelegt.

 

Notwendige Teile:

Eine Schraube M5, max. 15mm

Eine Mutter M5

Kleber (z.B. Sekundenkleber)

Eine kleine Feder

 

Beim Druck muss auf die Ausrichtung der Teile geachtet werden, damit im Gebrauch nichts zerbricht (Siehe Foto)

Die Mutter wird bereits im Druck eingebaut, dafür muss kurz pausiert werden. Die Teile werden wie auf den Bildern zusammengeklebt. Die beiden runden Scheiben werden als einziges NICHT geklebt, sondern verschraubt, damit sie drehbar bleiben.

Gedruckt habe ich das ganze aus PLA mit 0,15mm Schichthöhe.

 

English:

A torch holder designed for the FENIX C7, but should also work with other torches with similar dimensions (diameters 40mm (head), 27mm (shaft), 150mm height). Made to easily carry the torch on your belt and rotate it 360°.  The belt loop is designed for a 40mm wide belt.

 

Necessary parts:

One M5 screw, max. 15mm

One M5 nut

Glue (e.g. superglue)

A small spring

 

When printing, pay attention to the alignment of the parts so that nothing breaks during use (see photo)

The nut is already installed in the print, for this you have to pause briefly. The parts are glued together as shown in the pictures. The two round discs are the only parts that are NOT glued, but screwed together so that they remain rotatable.

I printed the whole thing from PLA with a layer height of 0.15mm.

Tags