1 / 4
JST-XH Fake Headers
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fake header to glue on normal pin headers to ensure correct orientation of connector attached.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 24
- Makes
- 0
- Views
- 101
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I prefer JST connections for my electronics. But some parts arrive with presoldered pin headers. Now, instead of desoldering the pin header and solder a new JST-header, I created a fake header, which can be glued onto the pin header.
NOTE: Because of the minimal ground area I recommend printing with a small (e.g. 2mm) brim. This can be kept to get a greater area for gluing.
I only use 4-pin headers, but I provided models for 2pins up til 10pins.