Counting matching models…
Each bend block is equivalent to a 22.5deg pc.. So 4 pcs will give you a perfect 90deg bend. They also have angle location marks/notches every 30 deg to help keep track of your compound bends, and make it easy to re assemble and mark once…
This is Headers Remix for the LS3 Chevy Engine ( https://www.thingiverse.com/thing:1911808 ). The features are : . Replacing factice screws by holes for real screws . Gaskets . Exhaust collector for driver and passenger sides Print…
This press-fit Raspberry Pi Pico case is made to work with headers, although will work fine without headers. This case was designed to be deep enough to fully protect the GPIO headers pins. There are a few variations of the top depending…
Couldn't find a suitable kit around for an important project car at work and most of the printable header mock up kits were difficult to print or had trouble with strength or used more plastic in supports than it did on the pieces. The…
The blocks incorporate a 79.4mm Center line radius (3.126" CRL) Alignment notches are every 22.5deg as well. Basic parts included: 1" long straight 1" long straight with dead-end 10 deg - 79.4mm CRL 15 deg - 79.4mm CRL 22.5 deg - 79.4mm…
Multi-material/Multi-color version pictured above available on my Cults3d Page Overlay tile replacement for gloomhaven board game. This is version of the wood dungeon door with a straight header instead of an arch, see remix source. Print…
ДЕРЖАТЕЛЬ ДУШЕВОЙ ЛЕЙКИ В ВАННОЙ ИЛИ ДУШЕВОЙ. 2 ПОЛОЖЕНИЯ ЛЕЙКИ.
Requirements 4x standard 0.1 inch pin headers for male connectors 4x standard 0.1 inch socket header for female connectors Print with PETG for better flexibility 0.3mm nozzle or finer will give good results
This case is a remix of dimo414 's Slim Raspberry Pi Zero W2 Snap-fit Case . That was a remix of Marius ' pi zero 2 slim case , which was a remix of his previous Slim Raspberry Pi Zero W Case . We got remixes all the way down! I made the…
Here is a case for a Lilygo T-Display S3 (without header pins) Files include: .STL + Fusion 360 source (.fd3) + Prusa Slicer .3mf file case was made in support of this project: https://rlatour.com/cpumonitorjr/ Hope it will be of use to…
Each bend block is equivalent to a 22.5deg pc.. So 4 pcs will give you a perfect 90deg bend. They also have angle location marks/notches every 30 deg to help keep track of your compound bends, and make it easy to re assemble and mark once…
If you've ever soldered header pins to a board, you know it's a pain to get them straight. You can stick the board and pins into a breadboard while soldering - that usually works. But if your board only has pins on one side, the other end…
3- and 4-pin compatible fan header, with a tab so you won't plug it in backwards! Great for DIY projects involving PWM PC fans, but it should work with regular 3-pin fans, too. I bought some generic pin headers and used flush cutters to…
Aligned Carrier Plate Pairing for Qidi Plus 4 The Qidi Plus 4's stock carrier plates have bearing mounts that are misaligned from the factory. See the cutaway photo provided. This cutaway is taken directly from the STEP files provides by…
A pin header holder to assist with soldering. Best printed in pair, you can also scale it in X if you want to hold larger pin headers, this size was the most convenient for my use case. Print settings I used 0.2mm Layer height 3…
What is it: It is a super slim case for the Raspberry Pi Pico W microcontroller. The case snaps together. No glue, no fasteners. The no glue part was important because at any point you may want to pop it loose of the case and put it on a…
I made this to hold my ADS1115 in place and level when soldering header pins to it. It would work with any other small, single-sided pcb.
This is a jig for installing the solderless GPIO header on a Raspberry Pi Zero/Zero 2. Same concept as this: https://www.adafruit.com/product/3413 Print 2 copies of the jig Hold it together with some screws or 2 allen keys (or whatever…
Redesign model of TryK A little bigger cutouts for fans and removed “pegs” for everyone with motherboards with headers placed too high to fit both brackets.
Eurorack synths use busboards with IDC power headers to distribute power across a system. If there's any risk a patchcable could come into contact with them and short pins, those little caps might grant you a sense of relief during your…
This 3D-printed IDC box header frame is designed to convert a regular 2-row pin header into an IDC box header. This is a useful solution for those who need to replace an IDC box header but cannot find one in stock, or for those who want…
Probably the smallest thing I ever printed. Making individual holes for each pin didn't really work out (possibly because of the material and nozzle diameter) so I decided to make two parallel holes fro three pins each and it works pretty…
A remix to make the original wreath holder fit my tighter door spacing and allow the door to still shut
3 Different styles of side dump headers for the RC Everyday Rat Rod kit https://rceveryday.com/1-10-Scale-Old-2-RC-Rat-Rod-Chassis-Builders-Kit-p536847181
Makes plugging in PC front panel IO headers easier! I've included STLs for the most common layouts and set up the OpenScad file to make it easy to create custom layouts if needed.
Designed this case to fit a raspberry pi 4 with the rpi-rf-mod header for homematic devices. There already are cases for the raspberry rf-mod combo out there, but my raspberry pi was getting way too hot and the cases didn't have a great…
Prints without supports if you orient the hole in the bottom (used for pushing the ESP board out of the case) on the build plate. Tolerances are tight, you may need to adjust the scale a tiny bit depending on your printer's calibration.
I wanted to add Whity's Expandable Steel Sheet Holder to my existing LACK Enclosure , but my externally mounted LCD was in the way. This header component provided the necessary clearance and simplified the mounting process. The height of…
Case for Heltec V4 Compact, screwless enclosure for the Heltec V4 LoRa board. The lid is held in place by press-fit (friction), no screws, no threaded inserts, no additional hardware required. Compatibility Heltec WiFi LoRa 32 V4 (not…
A simple square case with a pressure fit top that still allows access to the rows of headers and their names.
I am working on designing a new exhaust manifold for my Volvo 940 turbo, and I remembered seeing a tube snap-on plastic fabrication system from a company. Searched for a 3D printed version and found don-f design over at thingiverse;…
I wanted to extend Whity's amazing model to allow for the larger sheets used on the Bambu Lab X1C and P1P so I remodelled the original to work. Also included are files to create header pieces that can be screwed securely to a shelf before…
Protect the pins of your Flipper Zero modules. Designed originally for https://github.com/eried/flipperzero-mayhem/ Print in TPU Category: Electronics
This is an add-on for Exhaust Headers of the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). Be careful ; ExhaustHeader1Collector and ExhaustHeader2Collector are not the same. Print Settings 1 x ExhaustHeader1Collector :…
Can be used for ECAD models and modelling how electronics will fit in your enclosures.
Designed and printed in PETG, but it is intentionally a tight fit so you may have to scale it up a bit for ABS. I am not really good with soldering, but fortunately plenty of vendors offer the Raspberry Pi Pico with pre-soldered and even…
I wanted the original cover with my ST-Link V3 enclosure. This allows you to just use all your existing back plates and keep your cool serial numbers. I included my STEP files of the reverse engineered enclosure. you can also get them at…
Can be used for ECAD models and modelling how electronics will fit in your enclosures.
A jig for soldering header pins on sensors and ESP32 boards. It can also hold boards with pins already on the other side. Compatible with the C3 and normal variants of the ESP32 boards. It also works with all 1-sided boards (where there…
I started out with a plan to create a Raspberry Pi 3 GPIO header cover with customizable cut-outs for jumpers. The idea was to only expose the pins that are needed and protect the rest. In the end i have an scad fully customizable header…
Excellent ESP32 Devkit Case from @bkgoodman leaves pins exposed. Created something to cover those pin headers. Parametric FreeCAD project is attached. It can be used to adjust row and column counts, pin diameters and spacing. Wall…
Item is for modeling only and is not intended for printing
SAINTCON is a conference in Utah that has minibadges each year and as you collect them it becomes harder to display them. SAINTCON has a 10x10 board that will show off 100 of them and I developed a slightly smaller version of one and…
Since the Raspberry Pi Pico doesn't come with headers soldered, you're going to have to get used to doing this. This quick-to-print jig holds the pins in just the right place for the board. It's really hard to print fine-pitch details…
Designed this jig to easily install solderless GPIO hammer headers on the Raspberry Pi Zero without the risk of bending or otherwise damaging the Pi or the GPIO Header. Place Pi on the jig like in the pictures, place the header and give…
Background : I needed to cut down some female Dupont headers and found the jig by Nikki81 . It worked well, but I wanted to make some minor tweaks so I created a parametric design in Fusion 360 that allows you to adjust things like the…
This is a clip for programming a board that has solder pad for pin headers. This avoid to actually solder the header to the pad (leaving the board intact). Normally this kind of clip use pogo pins but I was in a hurry and didn't wanted to…
Inspired by several similar tools, I wanted to create my own, using laser cut acrylic. Works with any break-away, single row, 2.54mm male header pins, regardless of length, even right-angle headers. Inspiration: Break-Away Header Pin…
Sourced long header pins but needed some spacers for it, so made this. Current default values assumes you are using industry standard imperial header sizing and spacing. Print instructions Unassociated tags: pin headers Category:…
Included holes for pin headers
Customizable design of my solderless wire termination with pin headers (thing: http://www.thingiverse.com/thing:1380452 ). Notice when opening Customizer: the first image is a bug (and I don't know why), but as soon as you change a…
Minimalist Snap-fit Case for LilyGO T-Display-S3 Touch (Header Version) A sleek, functional, and easy-to-print enclosure specifically designed for the LilyGO T-Display-S3 Touch Edition . This version is tailored for boards with…
Fits a Raspberry Pi Pico W with no headers. Lugs to attach inside, but not strictly necessary as lid is a very snug fit and will hold it in place nicely. Micro USB Hole in base and LED Hole in Lid. Test printed (in photos) with eSun PLA…
This 8-pin header model is a precise CAD representation of the standard header that often accompanies the ESP8266. Designed to scale, it serves as a perfect reference for your PCB design projects, ensuring accurate spacing and alignment…
Little mod for anyone who had the same problem
I use Raspberry PI mounted on LCD screen. It's a good idea to pretect open pin header.
Quick edit of @Alexander_399046 's Gridfinity Bin to give 3 slots for esp32's with headers, and 5 slots without headers. Printed at .3mm in pla. Works great! Fits in tool chest thinner drawers nicely.
You Need These Parts: 4x2.5 mm Screw 4xNut Recommendation: It can be printed 0.12 mm layer height for better precision of fit.
INTRODUCTION This is another new header for 3D printers (FDM) very easy to print and assemble it. There is no need for any support and it is printed very easily. There is one piece build in methacrylate (but can be printed too), which…
A tool for holding a pin header to a PCB to aid when soldering. Will hold the pcb and header steady while at the same time making sure that the header is soldered with a correct angle. To use it clamp the board and header. Start by…
Just a little USB Header I've made to fit new USB ports to a Honda Fit/Jaz. It fits the "original" usb port.
A mockup of the Heltec V3 board but with headers. Original model by HighDoping!
Here's a model of an Arduino Nano socket/header board, which I constructed as a design aid.
Ribbon cable termination in pin-header cover/enclosure. Print two, as it will be mirror image when you put it together This is the third iteration of the design. Print Settings Printer: P3Steel Rafts: No Supports: No Resolution: .2mm…
This case was designed to hold a Raspberry Pi Zero 2w and v1 camera but still allow access to the headers and all the ports because I could not find one anywhere. It should still hold an original Raspberry Pi Zero and a v1, v2, or v3…
This is a clip to keep a PC case's front system panel headers together for easier installation onto a motherboard. Got the idea from my NR600P that came with a clip preinstalled; so I designed this for my other PC's. To install, I…
Print all parts in provided orientation. Button assembly can be glued in place, but only use a tiny dab of superglue on the bracket between the buttons themselves so they can still move once cured. Any countersunk M3 screw can be used to…
Hi Internet Sim Modders, This is a no frills, super quick and simple Dupont Male header to PC Fan adaptor. I've only added the 2 pin version for the +12VDC supply to a standard 3 pin PC Fan connector. It's intended for those dupont male /…
I ordered my QuinLED-ESP32 boards with the headers attached from the factory and they put them on the bottom so I needed a deep case to hold it. This is my very first design and I know there are quirks with it. There's nothing that holds…
A simple component you can use to represent a 15 pin header socket, for use when designing cases etc. Useful for ESP32 DEVKIT V1 designs. Not suitable for printing. The STEP file can be uploaded then imported into Fusion 360 for use in…
@Sneaks design is great! I couldn't find a module that allowed access of the terminals and had vents so I made one. Enjoy!
Finally a case for my Raspberry Pi Zero 2W with Pin Header for Anycubic Vyper Print Settings Printer: Anycubic Vyper Rafts: Doesn't Matter Supports: Doesn't Matter Infill: 20 Category: 3D Printer Parts
If you've ever made a custom Arduino shield using standard perfboard, you know the two digital IO headers are separated by a non-standard distance and won't line up with your perfboard. I tried using needle nose pliers to bend the pins to…
While making the invitations to my wedding, we needed a way to draw straight lines in pencil on the envelope quickly and accurately. So I made this crude drawing template. We used a pencil to lightly add lines to the envelope, then would…
Print without top and bottom layers, triangles infill 40%.
What is PinHeaderClip? Female pin header connectors — the small black plastic housings (often called Dupont connectors, jumper wire housings, or crimp housings) that plug onto 2.54 mm (0.1″) male pin headers — are notoriously loose.…
This is a configurable openscad version of @arturo182's design ( https://twitter.com/arturo182/status/1441494689652281344?s=20) It allows you to break a 40-pin header into smaller pieces. The configuration allows you so select the size of…
I use these Connector Rails for 2,6 mm busses and Dupont headers in my DIY Power Modules to be used with fischertechnik. They facilitate Dupont headers and the PTN2-10 cable shoes. For more information see…
Support: No support needed, you need to break away a thin section to insert the USB Orientation: “TOP” should be at the top Material: PETG, due to the heat at high currents.
simple jig to get straight cuts on 2.54mm pitch pin headers Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: printed with a 0.4 nozzle Infill: 100% Category: Electronics
A shroud that fits over the standard double-row pin headers and turns them into a shrouded pin header. It has an orientation notch and should fit standard pin connectors. I have generated and uploaded 6- and 10-pin header shrouds, because…
A useful little tool for Synth DIY enthusiasts! This little box allows me to convert between the five types of connectors I use the most in my shop. License: CC-BY-NC-SA 4.0. I've been getting into building DIY synthesizers recently, and…
The box for the single-board computer Rock Pi s. Box protects the SBC against damage and at the same time ensures good heat dissipation to prevent overheating. The box can be screwed together with an M3 screw. You can find the version…
In original model for trapped nut the hole for nut was too big for M3 so I made it smaller to perfectly fit the M3 nut.
For breakfast I like a hard boiled egg. But I do not like peeling the egg, so usually I cut the top of the eg with a knife. And of course I hit my fingers. More than once… The solution are egg cutters, or egg openers or breaking point…
Needed a case that did not expose the headers on my Pico W. Has a hole for the Debug connecter. Covers the header pins.
rPi Pico header soldering aid. Tool to aid soldering headers to a rPi Pico. I prefer using a breadboard to solder headers, but it can be hard to remove afterwards - easy with this tool, no worries about damaging the pcb or headers when…
You might also want to check out my other models for the HDZero Goggles: https://www.printables.com/model/1009854-hdzero-goggle-expansion-module-back-cap https://www.printables.com/model/1013045-hdzero-goggle-expansion-module-clip-hole-cap
A nifty tool for snapping off the perfect size of a pin header. Can snap off headers of size 2, 3, 4, 5, 6, 8, 10, and 12. For 12 you need to block the other side with your finger. Use seven M2.5 nuts and seven M2.5x6 screws to assemble.…
This is so simple I wasn't sure it was worth publishing, but I have found it useful, and it's a good way to use short bits of leftover filament. I use these header pin covers to block header pins that I want to make sure I do not…
If you are tired to try to keep your PCB headers on place when soldering them, here you have the solution that I've designed for. This model will keep on place the headers during your soldering tasks. To be honest, for me it super useful,…
Case for Raspberry Pi Pico 2 W (With headers). Top & bottom snaps together. Allows the BOOTSEL button to be pressed.
Summary Since the pins used in the original design are only available from big distributors (DigiKey, Mouser, ...) Shipping costs 20€. Stackable Pin Headers can be found much more often and are therefore more affordable. Additional Parts…
Slim Raspberry Pi Zero 2 W case with added GPIO header hole and clips for aluminum extrusions.
This is a soldering jig for a Raspberry Pi header. Drop the header into the socket in the center, drop your piece on top, solder away. I designed it so you could tweak the support layout to handle larger-than-normal components getting in…
solves the HTL problem by using a additional 60cc header tank used by nitro 3D helicopters. plus it gives a longer runtime per tank, 160cc stock vs 220cc with this upgrade. comes in 3 variants V1 only for Savage X V2 only for Savage XL V3…
Edge Header Programmer Clip Via Probes (e.g. OpenLog Clone) Author: Brian Khuu 2019 This is originally designed for connecting to OpenLog Clones I used P100-E2 probes for this Note: The purple openlog clone Programmer Port essentally has…
![Pi PICO-W Slim Case [SNAPS TOGETHER - no glue] (with and without headers)](https://media.printables.com/media/prints/385457/images/3229748_ab46d5e6-982d-4b10-a173-4fe5264d163a/2.png)
