Slim snap-fit case for Raspberry Pi Zero W2 with headers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for Raspberry Pi Zero W2 with headers
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 315
- Makes
- 4
- Views
- 1,315
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
This case is a remix of dimo414's Slim Raspberry Pi Zero W2 Snap-fit Case. That was a remix of Marius' pi zero 2 slim case, which was a remix of his previous Slim Raspberry Pi Zero W Case. We got remixes all the way down!
I made the opening in the top cover able to accommodate the header pins. After creating that opening, I had to modify the bevel of the case on the outside of the pins slightly to keep the same profile as the original files but give the walls enough thickness to be able to print properly still. I shifted the Raspberry Pi logo over a very tiny bit too. For the bottom part of the case, I increased the thickness to accommodate the cavity to accommodate the soldering of the header pins on the bottom of the board.
Disclaimers: