1 / 4
Raspberry Pi3A+ mount for Prusa MK3/MK3S with stackable Headers
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Alternative Einsy Housing
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 33
- Makes
- 1
- Views
- 746
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
Summary
Since the pins used in the original design are only available from big distributors (DigiKey, Mouser, ...) Shipping costs 20€.
Stackable Pin Headers can be found much more often and are therefore more affordable.
Additional Parts needed for this Build
1 x Raspberry Pi 3A+
2 x Stackable Pin Headers (https://www.sparkfun.com/products/9279)
The Headers in the Link are 8 Pin Headers, however 7 Pin Headers should be used. I cut one pin away with a wire cutter and processed the surface with a file.
Build Instructions
- Remove all the unnecesarry Raspberry Pi Pins as described in the manual. (In this case you don't need the longer Pins) https://help.prusa3d.com/en/article/prusaprint-rpi-zero-and-octoprint_2180
- Also remove the plastic spacer