Parametric RM 2.54 .1 in Shrouded Pin header (OpenSCAD)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.11 – €0.13 net (excluding VAT)
For file: wannenstiftleiste6_0.4n_0.1mm_PETG_MK4S_9m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.12 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 9 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Turn an unshrouded pin header into a shrouded one
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 43
- Makes
- 2
- Views
- 198
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
A shroud that fits over the standard double-row pin headers and turns them into a shrouded pin header. It has an orientation notch and should fit standard pin connectors.
I have generated and uploaded 6- and 10-pin header shrouds, because I needed those to use with my microcontroller programmer, but you can download and use the OpenSCAD script to generate shrouds for any number of pins (obviously, an even number of pins - if you enter an odd number, well, enjoy).
The shroud fits snugly over the pin header base and thus fulfils the basic function of preventing plugging the connector in with the wrong orientation. If you also need the shroud to provide stability against lateral mechanical stresses, glue it to the circuit board and/or the pin header base.