Counting matching models…
This space saving hexagon pattern basket system should do the job! Just print and forget, remember to turn the speed down if needed. You can stack baskets on each other with or without the lid - They stack BOTH ways!
Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA
XYZ Calibration Cube 20x20x20mm
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** Thanks to the awesome Delta P duct design by @teookie,…
3D MODEL DESCRIPTION Since the space of my desk getting lesser and lesser… so I have think of a effective way to re-organise all the tools and other stuffs… Pegboard is a fancy way to keep the things organised as we can mix’n’match the…
I wanted a gridfinity hex bit holder, there are a few available on Printables but none that quite had all of the features I wanted. I found the closest I could and remixed it to make it stackable. In gridfinty language this is 2x2 and 6…
Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA
Fully open source STEP files Please remix and share alike I'm sorry that all the files are not better sorted, labelled and optimized. 6x12 is designed for Fujinon SWD 65mm lens 6x17 is designed for Fujinon SWD 75mm lens 6x24 is designed…
BACKGROUND: The QMX , (tr)uSDX and Elecraft KX2 and KX3 are fantastic portable radios, but the microphone for the KX2/KX3 is relatively big and heavy, and there really is no good mic option for the (tr)uSDX. So, I decided to design one.…
You can use these squares to easily level your bed. Print them out and then adjust each corner individually. If the surface is rough, lower that corner and if it's not sticking at all or you see gaps between the lines, then raise that…
Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA
A test print file exactly 220x220mm with a height of 0.2mm (one layer) to match the Creality Ender V3 KE's build plate, with squares at the points where the auto levelling sensor touches the bed. This has the bonus of allowing you to…
The original Bambu Lab swatch is OK but it had a few things that needed to be fixed. label: I've added a a slot for a standard 12x22 label with 2 mm corner radius - like those for Niimbot or Brother Label printers. If you don't have one,…
UPDATE April 23-24, 2024 — Remodeled how the retainer clip is attached, to get better grip strength. This involved a remix of both the chain link and the clip. Version 1.14 and up has this. Also, added two new sets. Original was renamed…
The picture frame can be scaled easily, but remember to scale everything evenly. The backboard can be adjusted if you want to add a 20x20 piece of glass or acrylic glass. Supports needed. Make sure to disable support for the plug holes. I…
Simple Gridfinity bin. The name of the objects are the dimensions, for x and y and the height. The height is a multiple of 7mm: 2 = 14mm 3 = 21mm 4 = 28mm 6 = 42mm The x and y are multiples of 42mm: 1 = 42mm 2 = 84mm 3 = 126mm 4 = 168mm…
Simple, space efficient storage solution for small pliers/nippers/cutters/strippers used in electronics. Two standard bins in the files, one fits up to 6 pliers with a grip thickness of up to 11.5mm (the right one in the photos) and…
Used 2 self-tapping screws to attach to the shelf. Printed out in PET with at least 3 shells. Normal version for regular size tools. Bigger version for PASSK green impact wrench. Tested on: PABSP 20-Li C3, PDSSAP 20-Li B2, PASSK 20-Li A1,…
These are 2-, 4-, 6-, and 8-stack versions of the HSW 211x248 wall panel. Print at 0.28 layer height with 5+ perimeters to avoid infill. There is a one-layer separation between each panel. Import the STEP file to your slicer, split the…
[DESCRIPTION] This model is a battery adapter : from battery parkside x20 team sold by Lidl to any Makita tool using 18v battery. It is an remake from Myle's work (see : thingiverse.com/thing:3110392 ). Thickness differs from original…
IKEA Skadis inspired (compatible) peg board that takes up 200x200mm.
I remixed my own remix of @nicohirsch purge bin for the Core One to allow space for my remix of @PCR_178847 's nozzle wiper.
nut + 0,5 size % Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA
Housing for 16x2 LCDs with an I2C controller on the back. The front panel is universal and fits all versions of the back-part (45° or 90°). Select the correct hole diameter for your LCD screen (M2 or M3) and the display cutout (big or…
Trimmed version of Gdschaf border to fit the Honeycomb storage wall 211 x 248 panel, which is about the largest panel you can print on a Bambu Labs printer.
Gridfinity AA 2x2 battery holder for the gridfinity system designed by Zack Freedman .
I have used this profile for big and small prints so its safe and tested you can see the result from this profile on my instagram page https://www.instagram.com/smotech3d/ ! The only think you need is to level your bed your correct and…
I was looking for a Super-Sized fidget star. Since I could not find one, I created this one. The photo shows the new larger size verses the original size. Please comment on your make
Do pobrania moja wersja powiększonej baterii 3x względem oryginału do Parkside X20V Team, wzorowałem się na wersji dostępnej poniżej jednak samą obudowę zrobiłem od nowa wykorzystałem jedynie wsad na ogniwa 3x… Oryginalne źródło:…
I was looking for a simple, hands-free way to clean the black soot off the lead screws on my X1C, MK3S and Prusa Mini. To use this cleaner, simply stuff some tissue, paper towel or sponge material in the cavity, douse it in IPA and clip…
display for your 1/64 diecast cars, remixed I really liked the model by aonarcan. while slicing I noticed that the first layer could be better. I noticed the bridging that is unnecessary there. after I modified the model this problem is…
UPFRONT: I just created an Discord server for the PVS420 so its easier to talk about and share thoughts, ideas, improvements. All further updates to the design, functions and software will be available on my Discord!…
This is a lego compatible 2x2 turntable that prints in place! Wish I had a mmu upgrade but I don't, please share a make if you do! Printing 0.2mm layer height or less. Print with supports. Requires a bit of force to turn the first time,…
Pinted with PLA+ at 0,20. 2 walls and only 5% infill makes it strong enough.
The NA-IS1-12 is a 5mm thick intake side spacer frames for Noctua 120x25mm fans that can help to improve both acoustics and performance in suction or “pull” type applications where the fan draws air through obstacles such as grills,…
PARKSIDE X20 Battery Adaptor - adapt any power tool to use a Parkside x20 Battery . Revive your old tools.
Push in end cap for V-Slot 2020 Extrusion, 20x20 Extrusion.
Small surface mount box, for hiding cables and wago connectors
Gridfinity Shelf for the Honeycomb Storage Wall . I designed this to hold firm on your Honeycomb Storage Wall. Compatible with all your Gridfinity storage containers. Get your Prusameters… Post your Makes! If you like this project, please…
Used for testing bed level. After noticing defects in the first layer using PETG, this is a helpful guide to achieve smoother results. I suggest sizing down by 50% or even 35% to speed things up. Level bed with the knobs Re-Calibrate Z-…
A simple 2x2 building block compatible with Lego Duplo Rounded corners to make it suitable for kids No supports .step file for customisation Dimensions are pretty much exactly from the original, I just made some changes to make it more…
My first try at creating a model for sharing. Holder for 64 hex screwdriver bits and a magnetic extension bit. Inspired by LTT Screwdriver Bit Holder , but made “from scratch” in TinkerCAD using this template .
SCX24 JEEP Wrangler body Category: R/C Vehicles
When I was looking for mods for my artillery sidewinder x2 I had to look for them one by one, that's why I have made this compilation of all the mods that my artillery sidewinder x2 has. The vast majority of these designs are not mine, so…
Description This is a lego compatible 2x2 hinge plate that prints in place! It's a relatively difficult print. The small hinge likes to fuse together. Make sure your printer can handle tight tolerances. Printing 0.2mm layer height or…
I made a 2nd remix of this beautiful Spyro the Dragon full multi material model with way more details (he got more dragon scales on his back) and some corrected anatomy. Besides increasing the details I also sliced him into 2 parts and…
Quick remix of this brace to fit the new screw hole position of the sidewinder X2. To be clear this will not fit with the second part of the brace from the original (threaded rod.) There are now braces that fit correctly for the X2 if…
Update (08.12.2023): I reworked these models to meet the correct Gridfinity Specs. I based the first version on this model: https://www.printables.com/de/model/399759-actually-parametric-gridfinity-base-grid-bins , which sadly does not…
Update: v1.1, July 27, 2021. Model slightly uppdated to suit other of my output connectors. Sliced with 0,15mm layer height. A pdf file added: Parkside battery system.pdf, (placed under Download package). This is one of my first printed…
There are many battery holders for Parkside X20VTeam here. I made this one few years ago. Tested with PAP 20 A1/A3 batteries. For mounting purpose, you can use PDF template (print with 100% scale) and 3x D3,5mm Wood screws. My printing…
I couldn't find any low profile battery holders for my Parkside X20V Team batteries, so I remixed one! I designed this way back in 2020, but never published it. Sorry about that, here you go! If printed in the pictured way you don't need…
-Check out my new design here - This is a work in progress scx24 chassis. It has a slight angled skid and fully customizable skid plate angle to allow better break over angle. There is a version for all wheelbases ( I have not tested the…
Garbage Bin - 24x24x45 cm Consider following me on Instagram I post all of my projects to build a portfolio of my projects. https://www.instagram.com/smackmax_/ Fully Printed Waste Bin Tub under needs a bit of support 240 x 240 x 450 mm…
Hace unos años un familiar me pidió una tuerca de Métrica 18 y paso de 2 mm, ya que se le había roto la bomba de achique del barco. Tras buscar tuercas en Solid Works y no encontrar la de Métrica 18 y paso 2 mm, decidí construirla desde…
Universal test print to perfectly level your heat bed.
Overview: This is 3D-printed desk fan, designed to seamlessly blend functionality and style. Built around a powerful 120mm computer fan, this versatile device is perfect for keeping you cool or for fume extraction during soldering and…
Driveshaft for 1/24 scale crawler axial SCX24 and Probably AX24. First pass so still a little rough but practical. Designed this so I could flip my motor/transmission around for more weight forward. Needed custom driveshaft lengths. I…
This remixed part will serve as a replacement for the stock GoPro mount in order to provide a location for mounting 21x21 mm HGLRC M100-5883 GPS module on a SpeedyBee Mario 5 frame. GPS mount with GoPro v2: better fit and easier…
My Twotrees Totem laser was provided with a 8 bits board. I wanted to have autonomous laser engraver thus I switched for MKS DLC32 with low cost 2.4 LCD screen. This design will work on any 20x20 V-slot rail. I have used PLA as there is…
Taser Dummy with changeable cartridges. i used m5x35 screws and with m5x10x7 Plastc inserts Print Settings Printer Brand: Creality Printer: Ender 3 V2 Supports: Yes Resolution: 0.28 Infill: 10% @ 3 shell, 5 top/bottom Filament: Das…
Great design found on Thingiverse, great designs need a bigger stage and credits for Lorenzo54 who created and uploaded on Thingiverse! The tool mount is great in combination with the battery holder . Printing instructions: Resolution:…
Description This is a lego compatible 2x2 hinge brick that prints in place! Printing 0.2mm layer height or less. Print without supports. Requires a bit of force to turn the first time, the pla will wear quickly and it will start turning…
Gridfinity 1x2 bit holder I used a 0.2mm layer height with a 0.4mm nozzle. Included is the f3d file Included is a height extender (stl + f3d) if you want to stack two units.
The NA-IS1-14 is a 5mm thick intake side spacer frames for Noctua 140x25mm fans that can help to improve both acoustics and performance in suction or “pull” type applications where the fan draws air through obstacles such as grills,…
1st layer test by 0.2 layer height
It's a simple 7 card holder based on Gridfinity. All the cards are easy to take in/out, which was my main design goal. #gridfinity
This is V2 of my Tremor chassis for the SCX24 that I designed. It is a low CG-style chassis / Comp chassis. *If you are interested in selling 3D prints of this model please contact me* There are 2 versions to this chassis. A flat skid…
Remix of the original pen tray to fit a 4x2 gridfinity.
I modified the original and fantastic idea from wolffaayyy here on printables. I modified the rack, so that it only has 2 Steelsheets instead of 3 (most of us will probably only have 2. Also a modified it with a better tray opening, so…
I created a new pipe for the 5015 fan. It is printed without supports. On the triangular surface where the fan is mounted. This one is with ball bearings. The flow is much better than with the original fan. The fan is at an angle. It…
Kalibrierungs würfel 20 x 20 mm mit angeschrägten Kanten um evtl. vorhandenen Elefantenfuß zu kompensieren. Calibration cube of 20 x 20 mm with chamfered edges to compensate for any possible elephant's foot.
I re-modeled this with the exact dimensions from charlescho's design, except I reduced the height by 10mm.
This is model for portable power supply and with 5V USB output compatible with Parkside X20V Team battery. It utilizes power supply module i.e DPS3005, there are also other cheaper modules with the same size which can be used as well.…
The original file was two pieces and way to big compared to a real x26. It was a nice model so I modified it to fit my needs. We use it for recruits at police academy for scenario based training. Fits securely in holster. On the .stl file…
Note: This project is not being updated at the moment, I'm working on a different printer based on this but I can't promise any dates for release and it changes a lot of stuff so it's almost a new printer. Still, feel free to download the…
A border I created using Xander's OpenSCAD file for my HSW. Hopefully, it might save someone else the trouble of finding the best design. It suits wall-honeycomb-k1-211x201.stl for 220x220 size bed such as my Ender 3 S1. Print as many…
Please hit LIKE on my design if you download it so I get credit, thanks! This is a counter top enclosure designed to hold a 1602 LCD display run by an ESP-32 processor. There is also a spot for a LoRa transceiver. Fits these parts: ESP32:…
Wanted a way to store my brushes flat .
I found it difficult to source the same 20x6x2 magnets that Prusa uses in the USA, so I remixed the side storage design to accept these 20x5x2 magnets (actual dimensions closer to 18.9 x 4.6 x 1.8 mm). Required hardware: 29x 20x5x2…
M8 x 20 mm Bolt or screw with 1.25mm thread pitch follow or tip if u like <3 G-workz3D <3
🧱Lego Duplo Brick 2x2#3437🧱 RICORDATI CHE OGNI PERIODO DI GIORNI PUBBLICHIAMO I NUOVI PROGETTI (ANCHE LEGO) QUINDI ISCRITIVI,👤 SCARICA⬇ E LASCIA UN LIKE👍. REMEMBER THAT EVERY PERIOD OF DAYS WE PUBLISH NEW PROJECTS (ALSO LEGO) THEN…
Nature Wall Art with 2 deer and 3 mountains The full model is 600mm wide, 300mm high and 3mm thick. There are also pre cut parts so it can be printed on smaller printers 200x200 and can be assembled later. I suggest assembling with glue…
This remixed part provides a mounting for 25x25 mm BZ-251 GPS module on a SpeedyBee Mario 5 frame. As I don't own such GPS, please let me know if it fits.
Edit from April 24th 2023 Per request, I've added holes which “ should” work with SCPH-3000x I don't have any other model on hands than my 39000 so do it at your own risk. I'm keeping the old ones working on 39000 for now.…
They print quick and easy. They hold in place very well without any wobble or loose tolerance feeling
6025 Fan Holder for Control Board I used Noctua NF-A6x25 5V PWM Bambu > Noctua Dark Gray>Black (GND) Black>Yellow (+5V) Light Gray>Green (RPM/Tach) White>Blue (PWM)
What's more fun then 2 keys? Four keys! Designed to be compatible with Cherry MX style key switches. Just add four of those, some key caps, and a lanyard. It's recommended to use XDA form factor key caps, but others should work also! The…
This is a simple, modular drawer organizer for the Ikea Galant file drawer units. This thing is the 1x2 organizer that is 1/2th the width of the drawer. Print 2 of these to fill one row across the drawer - or mix and match with the 1x1…
Remix of this model https://www.thingiverse.com/thing:4694896 to store two controls and a headset
Print flat with supports for the groove at the side. Designed from a scan of an X20V battery. 17-03-24 - Added STEP file
A simple test print that should cover the bed with small squares. Each square is only 1 layer (at .2 mm) thick. I use this model to adjust my z-offset to just the right value - it's really nice to see uniform, clean, smooth squares. Print…
A hex/drill bit holder for Gridfinity that holds 4 rows of 10x 6.5mm hex bits. Each hole has a 0.5mm tolerance so the bits fit securely and can't rotate, but can easily be pulled out. I've left space below each row to print out labels.…
60x60x20 corner bracket that will accept M3 screws. Prints flat without supports.
None of the existing wallmount models pleased my minimalistic eye, so I decided to make my own. This fits at least all of the three X20V team tools that I have, although for the drill I had to also make a new belt clip to accommodate…
Features: - suportless magnet holes - easy to get the pen or sharpie from tray - stackable design
I adapted the Elegoo Centauri Carbon Printhead Fan cover (credit: magedark) to utilize the High-Efficiency fan grille STL developed by Noctua (credit: Noctua_at). I'm not sure about any actual efficiency gains from this fan, but according…
Makita LXT 18V battery to Parkside x20 tool adapter. If you include a locking part and then screw together top and bottom parts the adapter is fixed to the tool. Makita battery is always detachable. Bottom part uses original Makita…
![#0017 [Remix] X2 Delta P Duct [V2R2.2] for the MK3S(+) [New Flow Splitter]](https://media.printables.com/media/prints/155387/images/3720913_fbdbd996-a1de-4291-8b9e-a4c2554d6d73/mod2-and-3leds.jpg)
