Parametric RM 2.54 .1 in Shrouded Pin header (OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turn an unshrouded pin header into a shrouded one
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 42
- Wydruki
- 2
- Wyświetlenia
- 196
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
A shroud that fits over the standard double-row pin headers and turns them into a shrouded pin header. It has an orientation notch and should fit standard pin connectors.
I have generated and uploaded 6- and 10-pin header shrouds, because I needed those to use with my microcontroller programmer, but you can download and use the OpenSCAD script to generate shrouds for any number of pins (obviously, an even number of pins - if you enter an odd number, well, enjoy).
The shroud fits snugly over the pin header base and thus fulfils the basic function of preventing plugging the connector in with the wrong orientation. If you also need the shroud to provide stability against lateral mechanical stresses, glue it to the circuit board and/or the pin header base.