1 / 3
Pin header solder helper
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tool for holding a pin header to a PCB to aid when soldering.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 63
- Makes
- 0
- Views
- 389
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
A tool for holding a pin header to a PCB to aid when soldering. Will hold the pcb and header steady while at the same time making sure that the header is soldered with a correct angle.
To use it clamp the board and header. Start by soldering the pin that is in the center of the clamp . Move the clamp to solder the rest of the pins.
I wanted to avoid strange extra hardware so the only thing needed is a >14mm long M4 screw and a rubber band.
Print with 30% infill.