QMX Transceiver dual 3.5mm stereo audio plug adaptor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adaptor to house two 3.5mm stereo plugs to adapt to a QMX transceiver mic and spk
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 49
- Makes
- 0
- Views
- 406
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I made this to adapt an old speaker/mic to my QMX. The spacing between the 3.5mm audio plugs is 12mm.
It will only plug in one way because the other way the power cable will block it. The 3.5mm plugs I used have 7.9mm ends which depending on your print will be an interference fit into the adaptor,
I used epoxy anyway because I didn't want them to move and break the connections. The cable outlet is 5.5mm. Provision is made for a countersunk screw to lock it together. I used epoxy to secure the cable so that it doesnt twist and breal the connections.
Hope this works for you, I know it is not perfect, it literally took me 10 minutes in Fusion, so I'm not volunteering to make any amendements to it.