1 / 5
Cute Skull(With clamping mechanism)-original design was made by Mango3D — image 1
1 / 5

Cute Skull(With clamping mechanism)-original design was made by Mango3D

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The changes i made lets you lessen the gap after pushing the skull past the aglet by putting a clamp into a channel

Rating
0 / 5
Likes
8
Downloads
36
Makes
0
Views
157
Reviews
0

Updated at source:

Model information

License
Standard Digital File License

This model was originally designed by Mango3d please download and like the original model I had gotten permission from the creator to post this but remixes are turned off so the link leads to my make of the model from which the original model is linked. I will use the same license as the original creator because I had to alter the geometry of the skull to make the channel and the skull is not mine to let other people remix i will make a post containing the clamps that allows remixing so if you alter or make one of your own you would like to share you can post it there

also  you can create more channels or move the current one in the form of negative volumes using the 3mf files 

Recommended settings:

layer height .08mm or .1

XY comp should not be needed but if the parts aren't fitting i would try -.025mm to -.1mm

supports organic

seam position random

Instructions:

1.To use the clamp pull the skull through the aglet of the string 

2.Then push the clamp into the middle of the back of the skull hold the string and pull the skull upward to set it in place (I changed the color of the skull so it easier to see)

3.There is a ramp at the top of the of the channel in the skull so you can poke something through the bottom and push the clamp out if you need to take the  skull off

 

Tags