1 / 2
Ashtrap - The Over-Engineered Ash Tray
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Uses exposed infill to trap ash and reduce spillage from wind or tip-over
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 71
- Makes
- 0
- Views
- 673
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is pretty self explanatory. Give the side a few taps to force ash to fall down into the infill trap. Increasing infill density will trap the ash better but be harder to shake the ash down into. Must be printed with no top layers to expose the infill trap.
Recommended Settings:
Material: PETG, ABS, or ASA (heat resistance is important)
Layer height: .2
Walls: 6
Top Layers: 0
Bottom Layers: 6 MINIMUM
Infill: 6.66% (can increase for a tighter trap)