1 / 6
Rep Rap Warehouse/ Makerbot spool roller
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
You don't need any washers, it's spaced properly to use the bearing for everything. You'll have to print the left side…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 13
- Makes
- 0
- Views
- 273
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
You don't need any washers, it's spaced properly to use the bearing for everything. You'll have to print the left side and right side separate if you have a smaller machine. Uses standard 608 skate bearings. Clean up the frame hole with a 5/16 inch drill bit for a perfect fit. It will print on a 200 X 200 mm bed if you plate it properly and keep the skirt close. Check out my other designs for some interesting stuff that prints well.
Instructions
I printed it.
Category: 3D Printer Accessories