Temperature Adjustment Knob
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.69 – €0.85 net (excluding VAT)
For file: Elementvred Ver4 v2_0.2mm_PLA_MK2S_51m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.77 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 51 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Temperature Adjustment Knob intended for WÖSAB electric radiator
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 23
- Makes
- 0
- Views
- 72
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
Temperature knob for WÖSAB electric radiator.
Since the spare part is no longer available for purchase, I have developed a replacement.
It is designed in Fusion 360 and adapted for 3D printing in Prusa Slicer. Printed on Prusa 3iMK2S
The numbers on the front are raised 1mm. Thus, supports are required.
If you want a different color for the numbers, change the color of the filament before the first layer on the flat part of the button.
Please note.
The potentiometer that the knob controls is not of the stable type and is only attached with solder connections on one short side of the potentiometer.