Counting matching models…
Bring some rattling fun to your desk, shelf, or backpack with the Jolly Skeleton ! Designed in a simplified, cartoonish style, this adorable skeleton features a big round head, plump little hands, and boot-like feet. The head and jaw are…
from https://www.thingiverse.com/thing:5649133
Description Introducing the Ultimate 3D Printable Fishing Popper ! Get ready to elevate your fishing game with the “Perfect Popper” design, the perfect blend of innovation, functionality, and ease of assembly. Designed specifically for…
This cat toy is unique and puzzling to comprehend at first glance, but prints all at once with no supports. The ball inside rattles around but cannot be removed from the D20 (trust me, I've torture tested it with my cats). It also makes a…
Print-in-place: Single print - no assembly, no supports A remix of my snake with scales, but this time added a working rattle. So fun. Lots of articulation and detail. Print turns out great, comes off clean. Prints a rattlesnake 22" long…
Priunt Z=0,3 with organic supports. dimensions W x D x H in cm : 10 x 10 x 8 and 14 x 17 x 10 Print instructions:
The door of the K1 rattle badly , looks like crealty is cutting cost on the hinges and just used the 2 tiny rods within a metal hole as a hinge, also the door moves freely that some times it will slam hard … this is a fast fix I changed…
simle clip to cancel the rattle and vibration
Important notice: First thing is first:) This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to buymeacoffee or paypal, that will be greatly appreciated. I know…
This is another fishing Lure I'm working on... this one is a Rattle Trap Lip Less type lure. I've only tested it with my ultralight pole so far and it was a tad bit erratic. I think it might need a little more weight up front to get the…
First things first: If your fan rattles due to an imbalance or bearing damage, this model doesn't guarantee that it will be quiet again. It may or may not work. So please don't judge this model by whether it worked for you or not. Many…
A remix of my fun articulated rattlesnake with springy rattle. Updates from version 1: My first version was shorter than I would've liked, so this one is a little longer. After awhile the rattle broke off, so I revamped the design for…
NO GLUE. "Řehtačka," also known as "hrkačka" or "brkač," is a traditional wooden device that produces noise, similar to clappers, mills, and various other homemade tools that were traditionally used to call people to church services…
Introducing Rattlesnake v3 een cool and strong rattlesnake that is flexible and realistic. TIP. rattlesnake v3's tail is slacker than rattlesnake v3 big. and I hope you have fun with this improved design. and don't forget to like and follow
I have Z-Axis rattle noise since I have my MK3S+ and searched multiple fixes. Including here I found some. But nothing seemed to fix the issue that I have. However thanks to sabaatworld I actually found out why I have this noise. He has…
Wanted to print Mjolnir for my friends newborn but the hole closed only by the glued hilt did not feel safe. So I closed the hole - you have to add some marbles or other rattling items during print and they are safely enclosed by top…
Printed all the colors separately then glued together with some super glue. 15% Gyroid infill on the disc. 100% infill on the animals and accents. Used ironing on the animals to give them a smoother surface. Have a multi material printer…
Snap-together rolling ball with semi-round smaller ball inside so it doesn't roll straight. No glue needed. My cats love them! I also cut off small bells from broken cat toys and add them inside to make new cat toys. The ball is printed…
My nephew is really into Wild Kratts, so I decided to make some power discs for him. I wanted to print all the colors separately, though, so I took the original blank model by JanusRH and separated out the disc from the accent part. It…
update: 7/18/22: added a small stand to keep rings extended and a version without a raised center. -- print-in-place The sound made when shaking reminds me of a rattle snake or a maraca. (I used eSun PLA+) I developed and printed this as…
We use this model as a gift for born babies of our friends. We add the name of the baby to one flower leaf and the name of who gives the flower to the other one. Reduce the model as needed, I usually reduce it to 70% ratchet then it has…
I made this model for a little guy, and as PETG and superglue may have a tendency to separate one day (due to PETGs amazing chemical resistances). Printed in PETG, and superglued together, these threads will be extremely hard to seperate…
Egg percussion shaker rattle It prints in one piece with the beads sealed inside the egg. Once printed just drop the egg onto a hard surface a couple of times to free up the beads and start shaking :) See it in action here:…
Remixed the R17 Ultimulti version of the idler to remove rattling sound when idler moves. Remix of the original Prusa standard idler version here . Print as oriented. This remix adds a .5mm bearing spacer to each wall of the bearing slots…
This is a simple modification of the z-axis top printable parts which provides a firm grip for the smooth rods. Original part did not hold the rods firmly which caused a lot of vibration and rattle during homing and printing. Simply print…
Simple cat toy ball with rattle. The rattles were printed in different colors than the balls and dropped in during a pause when printing the ball. I found producing good results with minimal warping on the lower half of the ball requires…
Remixed the standard R4 version of the idler to remove rattling sound when idler moves. Remix of the Ultimulti version here: https://www.printables.com/model/893656/ Print as oriented. This remix adds a .5mm bearing spacer to each wall of…
Remix of baby rattle, prints in one go. Just toss a couple marbles in the head when the walls are high enough.
I just found a new home for some 6mm glass eyes. In the head of this rattlesnake! :) 3mf file provided. Holes for eyes should appear in print preview after slicing. I didn't use a brim on this one. The file does come with built in…
Fans of Despicable Me 3 might recognize this action figure of Evil Bratt. It's a jumbo action figure! Banana for scale (of course). Print Settings Nozzle and Layers: I printed all pieces with a 0.40 mm nozzle and 0.15 mm layers. A 0.60 mm…
I made this to go with the baby sword rattle by Targ . This baby shield rattle prints in separate pieces to minimize support. The four inserts contain the rattle medium and should be printed on edge with at least 4 perimeters and zero…
Version 2.0 Update It became clear that overtightening the holder on the lateral adjustment screws can cause the bearing holder to crack. While this did not seem to affect print quality, it's not a good thing to have a cracked bearing…
Start by printing two end segment parts and gluing them together. Add additional segments by printing pairs of segment parts and gluing them around the previous segment (see the cutaway diagram to see how the segments fit together). Shake…
This rattle makes a rattling sound based on the rotating movement of the hand.
Use these clips to get rid of the annoying rattle on the Harbor Freight Cabinet Doors. Just pop them on to secure the locking rods in place, and prevent them from rattling. This fits the U.S. GENERAL 22 in. End Locker, Series 3.
This remix incorporates a hollow cube printed inside the ball to give it a rattle sound. The cube prints precariously perched on the bottom of the ball interior, so that it can be easily broken free with a tool. I used glow PLA so my cats…
Includes step files, Prusa Slicer .3mf file, and the fusion 360 file. The hole size is for 67mm or smaller cans. Use a 5/16 inch nut and bolt or M8 nut and bolt. You will need some type of thread locker to secure the nut in place, like…
Here is a catch all bowl with a Rattan Kane webbing pattern. Think of it as a little gift basket you can use to gift thoughtful goodies. I would say, perfect for mother's day! Multiple filaments not required. The same print profile can be…
Je nach Bedarf kann eine leisere oder lautere Feder verwendet werden. Das einsetzen der Feder funktioniert am besten mit einer Spitzzange. Ich freue mich über Likes und Makes :-)
A baby rattle for my nephew. It is a print in place toy. After printing and removing supports it is ready to play. I used width of 3 walls and 10% infill. Works well for me. The more infill, the toy will have more weight and I was aiming…
grattoirs différentes variantes soit pour hot bed ou pare brise
This rattle makes a rattling sound based on the rotating movement of the hand. Thanks to @fifo182 for the cool basic design. Re-designed to three overall sizes and then different lengths of the main bodies for different sounds. Explore my…
Re-scaled 150%. 4 wall-lines No Support You must place it -1 mm into the print bed, to print without support.. Re scale if you like it bigger ;)
Introducing the Piston Baby Rattle to turn every baby into the gear head you have always wanted. This little rattle can be filled with a child-safe noise maker of your choosing (rice, barley, etc.) Print in PETG on a slow speed for…
I have added two small balls inside the toy which makes a rattle sound. This makes it interesting for the cats.Cat toy v3 have increased thickness of the sphere from 2mm to 3.2mm. Increased thickness can give more strength compared to cat…
My cheap Winsinn fans make a pretty terrible rattling sound when printing at accelerations over 5k. This eliminates most of the rattling sound by pushing the fan against the hub. The pressure on the hub can be adjusted by sliding the…
I've got a few younger nephews that are into Wild Kratts and I originally remixed the design to add additional animals. I wanted to make some new ones and now have a multi material printer. After some comments on the original of how they…
Zapraszam do filmu z budowy powiększenia Baterii do kosiarki Briggs&Stratton InStart 775IS… - Jeżeli chciałbyś zapoznać się z tym co robię na YouTube i Facebooku Zapraszam: https://www.magazynowanie-energii.com - Lista wszystkich…
The thingies will sit snug and apply just enough force to the display cover to prevent most of the rattling. [update] Added slightly larger variant in case the small one sits too loose. How to Print No Infill No Top Solid Layers No Bottom…
Put 15 m3 nuts inside during the pressing phase.
As the original coconuts have become too small for our rats, I have designed a slightly larger one to print myself. Threads can be looped through the 4 holes for easy hanging on the cage. If you turn the flat part downwards, you hardly…
Da die Original-Kokosnüsse für unsere Ratten zu klein geworden sind, habe ich eine etwas größere zum Selbstdrucken entworfen. Bei dieser Variante V2 habe ich einige Optimierungen angebracht: + Formänderung am Boden, damit das Objekt nun…
A toilet for small animals (rats, mice, hamsters, ...). With rounded areas on the inside for easier cleaning. Sharp-edged base so that no support is necessary. The two holes are for attaching to the cage. I had good results with slower…
The Ender3 V3 KE used to have two screws in the front that would hold down the linear rods in the base housing. Recently, there was a design change and Creality eliminated those screws (they were also too short). Now, on some production…
Simple grattoir pour les fraiches matinées ;) faites attentions, risque de rayures sur les vitres. je ne pourrait en aucun cas être responsable des rayures (cela dépendra du matériau utilisé et des réglages de votre imprimante) je vous…
This is a remix of Targ 's Baby Sword Rattle , with embossed Norse runes added to the blade. They spell the name of the name of the baby this gift is for. I only added to the design of the blade. The other model files and detailed…
1 Large entry for old rats, 1 small entry for young rats and for old rats to stick their noses out. 1 Großer Eingang für alte Ratten, 1 kleiner für jüngere Ratten und damit alte Raten die Nase raushalten können.
I created this wand as a toy for my daughter some years ago. She made great fun out of it! All the parts can be printed separately in different colours and materials to match your kids preferences. The print quality is good enough at 0.2…
The PocketSpool helps you to keep your fishing line untangled during storage and use. Uses a spring loaded ball to make an super satisfying rattling line unloading experience. I made it originally with steel ball and steel spring, but…
No more Ratteling This is a simple ring that fits around the bottom of the gas canister that prevents the “infernal” sound of it moving inside my Primus or Jetboil stove. I use id for the 100g canisters as they fit inside my stoves, but i…
I suggest printing it with a layer height of 0.1 mm for a better finish and edges. See photo of the diffence between 0.2 and 0.1 mm printing. Dimensions Length: 153.1 mm Width: 70 mm Height: 10 mm
This one catches big fish. Based on .50 caliber round, it's a rattling fishing plug that nets out to 4 inches. How to print - stand these on the nose, and put a modifier across half of the lure so that it is higher density on the bottom…
Overview - This model contains a (roughly) 15mm ball that can be hung from the ceiling using a piece of string. Inside, is a smaller ball that rattles around when knocked/pushed. This model can be both scaled up or down. Assembly - This…
Originally made to fill the Cowling of a 1/12 scale Grumman Goose. Provides a mounting for the Racestar A2212 1400 motor with a spinner setup that is a press fit on the Propeller Adapter (Collet Type) and fitts hard against the motor…
A plain rattan style box. Python sources include parametrization. Drop me a note for models with different dimensions. Several earlier prototypes were printed using PLA with variable layer height settings, either 0.15 mm or 0.2 mm base…
Printable creature power discs from the PBS kids show "Wild Kratts." There are models for the arctic fox and arctic hare. I also included a Fusion 360 model with no animal so you can add your own! Print instructions If you want, you can…
This is a Creature Power Disc holder I designed to hold the power discs uploaded by @FlyingPurpleCow and remixed by @darthGinger. The holder can fit up to 12 discs. It's designed for the discs to be printed at 75% scale (2.95" diameter).…
A rattleback, or Celtic stone, is an asymmetrical, semi-ellipsoidal object that exhibits a peculiar motion where it spins stably in one direction but wobbles and reverses when spun in the opposite direction due to its uneven mass…
I love my Arc/EasyARC enclosure but one thing was breaking my nerves… The front door rattling while printing! Even though there's magnets on the door, the top would still vibrate and make some annoying rattling noises, so I designed and…
I couldn't find any other models like this so I made one to use. Simply stop the print about halfway or so and drop in a small lead or steel sinker and resume the print.
I designed & printed this Sailor Moon baby rattle for my niece, and wanted to share it with other fans. Layer height : 0.2 or 0.12 Infill : 10 - 25% for everything but the Moon. Supports : the Moon, Pommel, and Hilt need a small amount of…
So if I had my time again I wouldn't bother doing this - I'd just pay the money for the stupid proprietary Briggs and Stratton Instart battery. But once I started I was kinda committed… This project is probably of quite niche appeal, even…
Easy to print rattle ball for the small ones to chase around. The ball is available in two diameters - 9cm and 13cm. It's a nice way to turn your almost empty spools into simple colorful toys. The ball can be assembled without glue and…
Falcon2 Pro Collection A TPU brace to hold your slats in place so they don't shift around when putting material on the bed to cut precisely. Print two sets to fully cover the slats in any orientation. Print as oriented. Default FLEX…
For transport in planes and in my backpack I am always concerned that the somewhat open contacts may get shorted by something metal and pokey. With a new tool only one of the flimsy push on safe guards are delivered and they do come off…
Inspired by Woven Pencil Holder Internal diamter : 57mm Interior height : 57mm Prusament : PLA - Mystic Brown Printed on MK3 Nozzel 0.4 - Layer 0.3
Each print profile is a unique rattan cane design for your future pen holder! Enjoy! Print Profile 1: Squares Print Profile 2: Circles Print Profile 3: Diamond
The rattle can be folded very easily. Connect the gear wheel and the rod by inserting a pin.
Simple but effective ice scrapper
Miscellaneous wicker rattan molds for your hand-woven projects, enjoy :)
Fixed the supports on the tail to prevent print failure.
All good prints need a good display piece. Print cactus in green and base in brown, grey or other desert color. The 3 Cacti are to be places in the 3 depressions made for them on the mount Scale to fit your print bed or even print 2 rocks…
Ajout d'un gratte dos sur une tapette a mouche ... J'ai pris la main de ce gratte dos => https://www.thingiverse.com/thing:4711596 Pour l'ajouter a une tapette a mouche que je ne retrouve plus ... Elle est en 2 parties La tête, est…
Printed from glass fiber reinforced nylon Taulman Alloy 910
This is a rattle reel for ice fishing, it lets you know when a fish has your bait by rattling. All you have to do is put 10-15 2-3mm steel BB's in the base then glue the top on and you are good to go. Supports: only for the mount DO NOT…
A simple clip for 5015 blower style fans that limits / completely removes vibration and rattle. This remix also includes a hole for cable management as I needed to run the wires along the side. This did work for me with my fans but your…
An other planter in rattan optic, that is perfect for your small succulents and cacti. Wood-Pla gives a natural look. Size: inner diamter: 5,7 cm inner depth: 5,5 cm You have the possibility to scale it up to your needs in the slicer.…
Modeled after Briggs & Stratton Part no: 795629 2 different thicknesses: .05in & .1in Might be the easy fix to your Brigs motor that wont prime Printed in tpu
Important! I modeled in Imperial units. Import as imperial or scale it by the conversion factor of 2540%. Use 0.2mm layers. Would likely be best to fill gaps/add extra perimeters if needed. Use supports, I used organic supports and clear…
un petit personnage hochet à imprimer pour les petits. pas de forme agressives et un réservoir intérieur pour y glisser.
I have Shimano disc brakes with BL-M315 brake levers. The levers were loose and rattling, metal on metal, every time I hit any bump. I designed these simple spacer shims to reduce the looseness and unwanted rattle. They fit the M315…
Yea this is that one tank that was never made by Germany. I made it for them 80 years later. I did have my own little spin to it, but If you guys don't like the modern turrets, I could change it up. I dare not try and print this, for I…
Not really a remix, i just separated the rattle itself from the spheres. All credit for this awesome thing go to the original author.
A lot of X and P series owners like me have complained about rattle noise during fast prints and heavy vibration. If you haven't looked at the part cooling fan in the hot end cover yet, check and see if the screws that hold the fan in are…
Schlüssel für Rattenköderbox Print Settings Resolution: 0,2 mm Infill: 35 % Filament: Fillamentum PLA Category: Outdoor & Garden
![[V2.0] Adjustable Y-Axis Bearing Holder for MK3 - Fix That Rattle!](https://media.printables.com/media/prints/77815/images/839402_b9ec1308-b6a5-4faa-83cb-8c211e56d19e/20211002_152949.jpg)
