Lens Cover DJI Goggles 3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Covers to print with TPU (82A hardness) to protect your DJI Goggles 3 lenses.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 64
- Makes
- 1
- Views
- 291
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Covers to protect your DJI Goggles 3 lenses. These ones are made for very soft TPU filament (82A). I used white filaflex from Recreus. I tried other models I found online, but they were either made for harder materials or didn't have a good fit and constantly fell off.
After printing you might need to do some cleanup and pull or cut off a few stringing errors.
The fit is not too tight I guess, in case you have problems with them falling off, try to shrink the model by 2-3%. Mine fit nicely though.
WARNING: I would not recommend to use hard plastics for this model. I added a lip that ensures to keep the lenses in place, which might scratch if made from harder materials.