Lens Cover DJI Goggles 3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Covers to print with TPU (82A hardness) to protect your DJI Goggles 3 lenses.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 64
- Wydruki
- 1
- Wyświetlenia
- 291
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Covers to protect your DJI Goggles 3 lenses. These ones are made for very soft TPU filament (82A). I used white filaflex from Recreus. I tried other models I found online, but they were either made for harder materials or didn't have a good fit and constantly fell off.
After printing you might need to do some cleanup and pull or cut off a few stringing errors.
The fit is not too tight I guess, in case you have problems with them falling off, try to shrink the model by 2-3%. Mine fit nicely though.
WARNING: I would not recommend to use hard plastics for this model. I added a lip that ensures to keep the lenses in place, which might scratch if made from harder materials.