BrewPi-ESP - RJ-45 Sensor Breakout Box /w Heat Set Inserts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for the BrewPi-ESP RJ-45 Sensor Breakout PCB, assembled with heat set inserts
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 23
- Makes
- 0
- Views
- 113
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
This is a case for the RJ-45 BrewPi Sensor Breakout PCB. This case makes it easy to mount the PCB somewhere convenient - between your BrewPi-ESP controller and your fermentation fridge.
This case is designed to be printed in two parts - a lid and a base. Brass heatset inserts are intended to be placed in each of the seven screw holes, with three M3 screws used to hold the PCB to the case base, and four M3 screws used to hold the lid to the case.
Assembly Bill-of-Materials:
- 7x M3 x 4.2 (diameter) x 6mm (length) heat set inserts
- 7x M3 x 6mm Screws
- 1x 2.5mm (small) zip tie
This design was primarily created in OpenSCAD. I have attached the source files. The “rounded edges” versions had the edges rounded in Fusion 360 after generating the STL in OpenSCAD.