Ikea Skadis Drill Brush Holder (smaller pegs)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A modified version of "Ikea Skadis Drill Brush Holder" from @AaronOaks
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 27
- Makes
- 2
- Views
- 118
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A modified version of "Ikea Skadis Drill Brush Holder" from @AaronOaks
The original pegs (~15.5mm x 5mm) didn't fit on my skadis boards (~14.8mm x 4.9mm). I ended up slicing the existing pegs off and adding pegs from another model.
Printed on my X1C using PLA with auto orient, auto tree support, and 3 layer walls.
There was a little bit of up and down wiggle once the mount was on the pegboard but it wasn't enough to warrant another print.
Edit: I originally exported the 3mf model to stl but after printing from the stl, I noticed they don't match. The pegs connect on the 3mf file but not the stl. For now, I'm removing the stl and recommend using the 3mf file until I can figure out why there is a difference.