Ikea Skadis Drill Brush Holder (smaller pegs)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modified version of "Ikea Skadis Drill Brush Holder" from @AaronOaks
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 27
- Wydruki
- 2
- Wyświetlenia
- 118
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A modified version of "Ikea Skadis Drill Brush Holder" from @AaronOaks
The original pegs (~15.5mm x 5mm) didn't fit on my skadis boards (~14.8mm x 4.9mm). I ended up slicing the existing pegs off and adding pegs from another model.
Printed on my X1C using PLA with auto orient, auto tree support, and 3 layer walls.
There was a little bit of up and down wiggle once the mount was on the pegboard but it wasn't enough to warrant another print.
Edit: I originally exported the 3mf model to stl but after printing from the stl, I noticed they don't match. The pegs connect on the 3mf file but not the stl. For now, I'm removing the stl and recommend using the 3mf file until I can figure out why there is a difference.