YeetHandle (multi-piece for easy printing)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of Reboot's YeetHandle. Redesigned as a multipiece handle to be easier to print.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 50
- Makes
- 1
- Views
- 248
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Yeethandle by Reboot is an awesome model and looked to solve an issue I was having with my Yeethammer - the torque from a single side bolt handle would cause the bolt to jam.
However my E3v2 wasn't going to print the single piece model cleanly. So I split it up, made some modifications and here it is.
It is now printable in multiple pieces and free floating so you can lift and lower it as you please.
You will need to print the handle, two sidebars (mirror one of them), and an additional nut and spacer from the official Yeethammer files.
Print with 4 walls and 40% Gyroid Infill for extreme durability.
The handle has a modeled M5 thread through the whole thing so run any M5 screws you have laying around into each side. There should be enough length on the threaded rod to fix it down with another nut.