Anycubic Vyper lightweight printhead
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A printhead with fan nozzles for the Anycubic Viper, Versions A to D, original fans.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 64
- Makes
- 0
- Views
- 426
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
A printhead with nozzles for the Anycubic Viper, versions A to D using the original fans.
I got a used Vyper with a broken printhead. The fusion-file from https://www.printables.com/model/105320-wide-deflectors-anycubic-vyper-printhead (merci beaucoup!) helped to construct a lightweight head with a silent main fan (Noctua) and improved cooling airflow.
The center fan nozzle (air-guide) and the LED shade should be printed in TPU or other flexible material.
CenterNozzle.* has been improved, HiFlowCenterNozzle.* has been added for nozzles with thicker base.
For Vyper Revision D a cable guide was added, print it in TPU or other flexible material.
(If your print light does not work you probably have a broken cable wire).
Cut M3 threads into the fan holders.
You need some M2 bolts and nuts for the side fans.
Use one longer M2-bolt to fix the LED with a small cable tie.
Two small self-cutting screws (10x2 mm) fix the cover.
On cooling down. the center cooling fan of the Vyper stops at 64 °C. For some more cooling with the side fans you can append the following lines to the printer's end-code:
M109 R66 ;cool down extruder, center fan stops
M104 S0 ; turn off temperature
M106 ; further cool nozzle with the side fans
G04 S300
M107 ; turn off fan