1 / 3
Prusa Core One Side Storage - No Magnets
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A minimalist no-magnet side storage solution for the Prusa CORE ONE.
- Rating
- 4.909 / 5
- Likes
- 104
- Downloads
- 288
- Makes
- 8
- Views
- 3,126
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hey there!
I’m a big fan of David’s side storage solution for the CORE ONE. But if you’re like me and just need the tool holder or don’t want to waste time searching for the perfect magnets online, this is a simple solution that uses Nylon rivets instead. Just attach them to the side holes of the panel (you’ll need to apply some force to push the rivets in).
Here are some notes:
- I added a hole on the left side of the tool holder so you can store a plier there.
- The tray on the right side is now bigger.
- I added a tray that stays at the bottom of the panel, in case you need one.
- If you have a PRUSA XL, you can print these add-ons in one go.
- If you use a CORE ONE, the files are divided into three parts. You can combine them with four M3x8mm screws and four M3 square nuts for the tool holder, and four M3x8mm screws and four M3 HEX nuts fpr the bottom tray.
- You can use double-sided tape at the back for extra strength.
- I leave the step file if you wanna customize that further
Let me know if you have any questions! Feel free to ask.