Prop Guards for HGLRC Drashark 1.6-inch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Propguards for HGLRC Drashark 1.6" to protect propellers and motors. Requires longer M1.6 screw.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 91
- Makes
- 0
- Views
- 557
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
These propguards are specifically designed for the HGLRC Drashark 1.6-inch quadcopter to protect your propellers and motors from impacts and damage. They provide excellent stability and durability without significantly adding weight to your drone.
The propguards can be printed in any common 3D printing material – I have successfully tested them in PETG and PLA. Depending on your material choice, they offer solid protection for the delicate components of your drone.
Installation
For installation, you'll need a longer screw. The propguard is attached with a single screw. Simply remove one of the three motor screws and replace it with a longer screw. The screws are M1.6 and should have about 4mm of threading to secure properly.