1 / 1
Creality K1 Hopper
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Version 0.01 Alpha, just tested a few times and it works as intended, but needs a few tweaks.
- Rating
- 0 / 5
- Likes
- 38
- Downloads
- 128
- Makes
- 0
- Views
- 1,629
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
An initial prototype design for a filament hopper system intended for the Creality K1 3D printer.
Mounting Instructions:
- Requires drilling into the printer's middle frame.
- Secured using two (2) M3x12 screws.
- Utilizes an M3x45 screw for the rotating axle.
- Heat-set inserts are required at both ends of the axle for stability.
Component Details & Requirements:
- Metal Inlay: A custom-cut metal inlay is necessary for operation (prototype used 1mm aluminum sheet).
- Silicone Wiper: The right side is dimensioned for a Bambu Lab silicone wiper, requiring slight modification to fit.
- Mechanism: This version does not feature a spring mechanism; this is planned for V0.2.
Compatibility Note:
- Developed for the Creality K1. Potential compatibility with K1 Max or K1C is unverified.
Provided G-Code Macros:
- Disclaimer: The included G-Code macros reflect the designer's specific machine calibration (including a Y-axis offset). Users must review and adjust these parameters according to their own printer's configuration prior to use. Failure to do so may result in improper operation or potential damage.
|
|