1 / 2
Challenge coin holder for framed display
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a holder that can be mounted inside of a frame that has a 10.5 inches (267 mm) width inside the frame.
- Rating
- 0 / 5
- Likes
- 30
- Downloads
- 86
- Makes
- 0
- Views
- 1,289
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
I have a display case frame that has a depth of 10 mm and an interior width of 10.5 inches (~267 mm). The curvature on the holder fits coins up to 50 mm in diameter. I used push pins in the felt backing to hold the printed piece in place in the frame. The groove is 5 mm by 5 mm and runs the length of the print.
I printed the piece in PLA at 2mm layer height, 15% infill and a brim. Printed with the groove side on the print bed, with bridging enabled, no supports.