1 / 2
Banana Jack / Banana Plug (M12 Slotted Nut) Wrench for Tight Spaces, with 1/4" Socket — image 1
1 / 2

Banana Jack / Banana Plug (M12 Slotted Nut) Wrench for Tight Spaces, with 1/4" Socket

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A thumbscrew type wrench with 1/4" socket driver hole for tightening the odd shaped nuts of through-hole banana jacks.

Rating
5 / 5
Likes
4
Downloads
36
Makes
3
Views
221
Reviews
2

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Share Alike

A thumbscrew type M12 slotted pin-spanner/face-spanner wrench with 1/4" socket driver hole for tightening the odd shaped nuts of through-hole banana jacks. Designed for tight/close spaces. 

Print as a structural part (i.e. 0.2mm layer height, 0.4mm forced extrusion width, 40% infill, 4 walls, 5 solid top/bottom layers, and no supports). If long term use is planned, print with a tough filament. This is a use case where glass or carbon infused filaments are particularly effective, though for the expense and time cost of switching filaments, you could just print another one if the first one ever wears out.

 

SUPPORTING YOUR FAVORITE DESIGNERS:

If you like this, consider using one of the affiliate links below to buy your next roll of filament. Likes, follows and downloads are also appreciated.
 

BOM: 

 

Tags