T-nut for 2020 aluminium extrusion profile
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A pack of T-nuts for 2020 aluminium extrusion profiles with a variety of different types of T-nuts.
- Rating
- 4.9 / 5
- Likes
- 755
- Downloads
- 2,418
- Makes
- 9
- Views
- 7,466
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
This is a complete pack of T-nuts designed for the assembly of 2020 aluminium profiles. This pack contains a variety of T-nuts for different applications. There are T-nuts for different sizes of screws, and there are T-nuts with pre-tapped threads or to be fitted with regular nuts, and there are T-nuts that can be dropped into the slots or to be pushed into the slots from the side, and there are also T-nuts with double screw fastenings, these are 10 mm apart.
Printing and print settings
Use PLA or PETG and a nozzle width of 0.4mm or less and 100% infill to make it solid. For the threaded T-nuts, you will need to print with a layer height of 0.12 mm and I also recommend that you print the models at a low speed, e.g. 50 mm/s, to make the threads usable. My recommendation is to print the T-nuts without a support structure, but with a 2-3mm brim, as the footprint is small. However, there is one exception, the drop-in T-nuts for the M3 nut need to be printed upside down with a support structure. In the model files the parts are oriented in the best direction for printing. There is no need for post-print finishing of the threads and the screws are easy to screw in.