Twins bookmarks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Standard Digital File License
In the print project, the negative part is inserted. If you dont want a hole in the bookmark, remove it before the print.
Models are size 50x150mm. Do NOT adjust the thickness (Z) in your slicer! The layers will not come out right. You CAN adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness.
Nozzle: 0.4 You may print at higher layer heights below the Min Depth of 0.40mm. The Max Depth is 2mm and the Actual Depth is 2mm
These were my settings and colors for my print that you see in the picture. Your results may be depending on the filament you use.
Filaments Used:
PLA Elegoo+ Black Transmission Distance: 0.3
PLA Devil Design Light Brown Transmission Distance: 2.6
PLA Elegoo+ White Transmission Distance: 6
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Light Brown
At layer #11 (0.96mm) swap to White for the rest.