VW Beetle print-in-place car model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small (5cm) print-in-place model of VW Beetle car with movable wheels with under one hour printing time.
- Rating
- 5 / 5
- Likes
- 59
- Downloads
- 425
- Makes
- 10
- Views
- 1,693
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is small model of famous car. Its designed as a toy resembling a VW Beetle, not as exact model. Model is print-in-place and has movable wheels.
You can chose between tight and slightly looser tolerance between axles and chasis.
Printing instructions:
Printed with PLA in 0.15 resolution.
There are grooves in axels . They are here to hide seam in that groove, so seam does not blocks free rotation (prevent fusing). So use ALIGNED seam position and/or paint seams here (see picture) in Slicer and ensure, that seams are inside that grooves. I recommend to paint seam on bottom of chasis to achieve nice look of car. In 3mf files it should be correct.
