Yamaha Bolt/SCR air intake adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter mounting flange for the Yamaha bolt or the Yamaha SCR it allows the use of 4" or 2" air filters.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 105
- Makes
- 0
- Views
- 346
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
This is a tricky print and should be printed out of nylon or ABS. I did run it with PLA for a month with no issues, but due to the heat at play here I wouldn't recommend it. The gaskets should be printed with TPU. The secondary adapter can be screwed on or glued on with a good epoxy. Both have worked.
This readily works with any 4" hose clamp style air filter for the primary adapter or 1" ¼" hose clamp style air filter for the extended long neck adapter.
Upon install, you will need to route a breather hose from the bottom to the top just ensure there are no kinks in the hose and removal of the tank could help but is not necessary.