Yamaha Bolt/SCR air intake adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter mounting flange for the Yamaha bolt or the Yamaha SCR it allows the use of 4" or 2" air filters.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 105
- Wydruki
- 0
- Wyświetlenia
- 346
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
This is a tricky print and should be printed out of nylon or ABS. I did run it with PLA for a month with no issues, but due to the heat at play here I wouldn't recommend it. The gaskets should be printed with TPU. The secondary adapter can be screwed on or glued on with a good epoxy. Both have worked.
This readily works with any 4" hose clamp style air filter for the primary adapter or 1" ¼" hose clamp style air filter for the extended long neck adapter.
Upon install, you will need to route a breather hose from the bottom to the top just ensure there are no kinks in the hose and removal of the tank could help but is not necessary.