Liczymy pasujące modele…
I could not find a scraper sporting a hex pattern, clearly this had to fixed. Perfect for scraping prints off your build plate, as well as your other scraping-needs. Should be printed with .15 or smaller layer height to make the edge…
Based on the idea of the user Sneaks i made a measuring tool for metric screws. This tool can measure M2-M10 screws with a length of 4-120mm Printing instructions: 0,15 mm layer height no supports infill 15% rectangular infill 2…
News 2024-04-10: Please also check out my new Blade Dispenser for this Bed Scraper: This is the XL version of my popular Optimized Bed Scraper with quick-change blades. The cutting edge of the blade is 45 mm, a full 30% longer! Each blade…
I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…
The Solder Scroll makes soldering more ergonomic by allowing you to just scroll on the pen shaped tool to add solder. By rotating the knob, the tool can be adjusted to accomodate different diameters of soldering wire (0.3 - 1.5mm). A…
Honeycomb Wall parts I designed, I also created my own Screw Wall that is much stronger and many more available tool holders (over 300) check it out! Thanks for looking. Screw Wall now has over 50 Club subscribers! I also have created…
Print in PLA so you dont damage the printbed. Check out the new larger model at: https://www.printables.com/model/291609-bed-scraper-mk2-8g-25min Still uses only 8g and prints in 25min. Print instructions Click print =)
UPDATE 3.1.2023: added V2 version with different inner shaping → same external size & characteristics, quicker print Info: 🟠 round edge → longer edge → scraper lasts longer then other spatula types scrapers if it is less sharp on one…
This set includes screws, nuts and washers of all kinds ISO 4017 DIN 933 With smaller screws and nuts, it is necessary to set the height as low as possible so that the screw works correctly for example at M3, M4 and M5 The screws are…
UPDATE: 2022/12/14 No changes in this update, just a big thank you to everyone that's downloaded, posted a make, remixed, or re-shared this model! This was only the fourth model I shared and was the first ‘big project’ I took on while…
Carabiner with lock that I created for study For greater strength, increase the number of walls. Normally I use four walls but I recommend using five or more. The use of supports is required in the parts highlighted in the image. WARNING:…
About the Scrapers: With a length of 86 mm and a thickness of 5 mm, the scrapers are very compact. The grooves on the side of the handle provide a firm grip. The angle of the front wedge is 26.6° and is therefore quite robust. Of course…
Print, assemble and play directly, no screws needed 8-11
1.75mm filament clip with screw. One size fits most spools. 31 October 2022 update New body with tearshaped screwhole to fix issue with screw being too tight. Added screw model from second edition of filament clip. Second Edition…
Dieser Bed Scraper ist das ideale Werkzeug für alle, die ihre 3D-Drucke sauber von der Platte bekommen wollen. Es wurde speziell entwickelt, um das Druckbett vorsichtig zu reinigen und fertige Drucke sicher zu entfernen, ohne die…
It's -8℃ currently where I am. I needed a new ice scraper. It's strong and I've gone through several iterations to get it to feel comfortable in the hand. There are ribs along the handle for better grip as well as a large indentation at…
Simple functional M5 hexagonal nut and bolt Nut is scaled to 105% from ISO4032 Bold is scaled to 95% from ISO4014 Perfectly functional 3D print. Print instructions Parts Summary Simple functional M5 hexagonal nut and bolt Nut is scaled to…
News 2024-04-04: Upon request, I designed an XL version of this scraper with 30% longer blades: News 2024-03-10: Please also check out my new Blade Dispenser for this Bed Scraper: Optimized Bed scraper with replaceable blades Since the…
This is a brass brush nozzle scrubber with a bucket for Voron 2.4. It has 2 parts which connect together with standard 6x3 Voron magnets. Printed without support. Designed to fit 300mm Voron 2.4 but could be used in 250mm or 350mm Voron…
This innovative tool simplifies print removal with its user-friendly design and unique features. The random pattern design ensures fast print times. No supports are needed, as the model will print fine without them. Durable and reliable…
This collection regroups the models of handles for nuts and screws i designed over time. All designs can be printed without support, refer to the illustration to identify the different types. Bigger sizes up to M12 are available here:…
this system is fully compatible with standard grifinity models. Based on ZackFreedman design it screws together using 4-40 socket head cap screws and heat set inserts, with an optional 1/8 dowel pin in the center if you want to be truly…
CIUNCARELLO boats a distinctive design and features that sets it apart from conventional bed scrapers, making it the ULTIMATE Accessory for your 3D Printing needs. 8x6mm Magnets are strategically placed at both the front and back ends…
This is a useful Blade Dispenser for my new Optimized Bed ScraperXL with replaceable blades. The dispenser holds 44 blades and has a hook to which the bed scraper can be attached. Double-sided adhesive tape can be used to attach the…
🇬🇧 English 🇬🇧 (In 🇫🇷 Français 🇫🇷 at the bottom of the page ) Ideal for your 3D designs, find 3D models of ISO M3 screws L4-L5-L6-L8-L10-L12-L14-L16-L18-L20-L25-L30-L35-L40 in .step files. and their washer and nut. Advice for 3D conception…
Please note: This is an adapted version of my Raspberry Pi 3 case ( https://www.prusaprinters.org/prints/4038-malolos-screw-less-snap-fit-raspberry-pi-3-model-b ) that I modified to fit the Raspberry Pi 4. I do not yet own the Raspberry…
Note: Update available here: Pocket Screwdriver Kit v2 I picked up a pocket screwdriver kit similar to this at a tradeshow many years ago, and I wanted another one so here it is. The bits fit in snugly and the cover snaps closed. No…
Necessary commercial parts 4 stainless steel “608” bearings. These are the same as the spooler bearings that come with the Prusa MINI. 8 cap screws (M3-15 or M3-16) 8 nuts (M3) Foam rubber sheet with adhesive on one side. Recommended…
This is a remix of the Rod and Tube Cutter for Dremel by GreaseMonkey88 on Thingiverse ( https://www.thingiverse.com/thing:4241055). But after printing I realized that it does not fit my Dremel 4300 (and possibly other large Dremel…
Screw and nut model by Ondřej Stříteský The model which we use on our promotional photos for Original Prusa MINI 🙂
Use case This screwdriver (bit holder) is made for fine to medium duty work. It is made to fit well into the palm of your hand, while still giving you a good grip for your fingers to apply some reasonable torque. Thanks to the clamping…
Super fun, Easy to print, Relaxing Gear Cube Fidget! This prints very easy and fast and just clicks in during assembly! How to assemble: Begin by putting all the pins into the core Put on the bigger gears on the bigger areas Put on the…
I really like maxwxyz 's Screw Claw , but I'm not fond of printing the thin screw holder fingers in the vertical orientation. I also wanted to accommodate a larger variety of screwdriver sizes. This redesign has all the flexing elements…
Self draining scrub daddy holder. Printed with 15% infill and supports to baseplate.
Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA
Note added Oct. 5, 2021 : As some people have had problems printing this without infill, I have added files for 15% rectilinear infill. This scraper can be safely used on the build plate with little danger of scratching or gouging the…
Expectations: Don't expect a screw that is strong as its metal counterpart, but it will do the job for low stress applications. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 5mm/s…
Hey, since the cleaning with several paper towels has always annoyed me, I have designed this small but helpful tool. You just click it into the Lead Screw and move the Z axis completely. If the lead screws are very dirty, you can repeat…
Inspired by RJ Design's Impossible Vortex and Pyramid, but redesigned from scratch here with my own pitch, lobes and external shapes and models. ALL of these are my own design from OnShape with no measurements or copies or work taken from…
Often I found myself needing thumbscrews on my projects, and since M3-M8 are my most common used sizes i deceided to make myself some, and this is my Knurled version of my standard thumbscrews. The thumbscrews are designed for socket head…
Universal Ergonomic Screwdriver (Remix) This is an updated version of the popular universal screwdriver, focusing on improved ergonomics and an expanded set of collets. The main changes concern the shape of the handle — it now fits much…
PLEASE READ THE PRINT INSTRUCTIONS! TRIM IT AND DON‘T GIVE BAD RATING JUST BECAUSE YOU CAN‘T READ INSTRUCTIONS! After printing i cut the front of the shaper to make the tip a little bit more stiff and when cutting it angled it will be…
There already is a plethora of raspberry pi cases on the internet and the last thing we need is yet another one ... well - I created one anyway ... because I wanted to and I had a lot of fun doing it :-). I tried to achieve the following…
Update 17/09/2023 Added “HSW Ez-V1 Round Object Holder - 65mm Left” Update 29/04/2023 Added “Ez-V1” and “Ez-V2" hooks (14 files) which supersedes all other versions. These have been completely remodeled for improved strength, easier bed…
Note to printables staff : this is NOT a remix of a different model that doesn’t allow remixes, it is an original design of my own making where I invested significant effort. As proof, I am including the Fusion360 CAD files here to prove…
PROJECT PRESENTATION This project is a tripod allowing to maintain a phone in all possible positions thanks to a ball joint . The assembly is done without any screws , which however does not affect its robustness. The goal for me is to…
caliper size on the cover photo is 78.5 mm Someone posted on reddit asking how a helix screw toy was made but did not have a link to the STL so i reverse engineered it and made my own version. I added the full parametric fusion 360 source…
A quick but sturdy print bed scraper that's intentionally long with open infill so that you can also use it to swipe at the purge material. It will catch in the infill and drag away cleanly. To fit the Prusa Mini use the 3mf and scale to…
Screen Accent for the Elegoo Centauri Carbon.
I was told that it'd be impossible to fit a ratchet mechanism inside a tiny screwdriver, let alone hold more than a single bit. This is to prove that person wrong ;) also check out the Print-In-Place version A reversible ratchet mechanism…
This is a standard camera screw, as included with most tripods. The knurled headplate is a real stress test for FDM printers. ;) Due to the tiny dimensions, I recommend printing it using the highest resolution/lowest layer height your…
Outer Dimensions: H: 44mm R: 38mm Inner Dimenions: H: 35mm R: 30mm Print Settings: 0.08mm Layer height 3 Walls 8 Top and Bottom shell layers 45% infill Fuzzy Skin with a modifier so it doesn't affect the outer thread → Contour with 0.3…
Updated modified design - big “groove” added on top side, so scredrivers sit in it and cant fall off when accidentaly hit. Universal comb type holder for various tools. Comes in two sizes for bigger and smaller tools. Big - 5 cut outs for…
Description Tired of struggling to remove prints from your 3D printer bed? This ergonomic and durable bed scraper is designed to safely and efficiently lift prints without damaging your print surface. Whether you're using PEI, glass, or…
Tento scroll box je složený ze 3 dílů, není třeba žádné lepení ani šroubování. Postačí vám cca 14m filamentu a můžete jet bomby. Roleta má klást menší odpor a má držet v jakékoliv poloze. Při zasunování boční strany boxu nezapomeňte mít…
Würth keychain screwdriver Introducing the Würth keychain screwdriver - Your Go-To Tool on the Go! Are you tired of fumbling around for a screwdriver when you need it most? Say goodbye to the hassle of searching for the right tool with…
ULIMATE Print Bed Scraper/Windshield scraper wide and narrow versions! print at 0.16mm layers or less for best edge. Don't forget to- like share print and follow!
Second edition of the 1.75mm filament clip with screw. 31 October 2022 update New body with tearshaped screwhole to fix issue with screw being too tight. Added screw model from original filament clip. What's new compared to original…
Update 6. Aug. 2023 The STL ist about an 1cm larger than what you see on the Lavazza photo. You can print it a little bit smaller if you want. Especially if you put you coffee bag into a Kellog's tin can as shown in the background. Update…
BOM: Printed with ROSA3D Starter PLA Black Ditch the dangerous metal spatulas! This 3D printable plastic scraper is the perfect tool for safely popping stubborn prints off your build plate without risking deep scratches on your PEI,…
Print: On the side
Use the Skadis T-nut to mount different accessories to the IKEA Skådis board. The accessory will be firmly attached to the board and will not come loose when used, as can happen with conventional hooks. Is the threaded T-nut strong…
The Revolver Born from a particularly frustrating weekend of printer maintenance, tinkering and DIY I bring you “The Revolver”. A fully 3d printed screwdriver for ¼" Hex Bits What started out as a fun weekend, slowly spiralled into…
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of Torx screws according to ISO 724 , ranging in sizes from M2 to M20, each available in lengths of 5 mm, 10 mm, 15 mm, 16 mm, 20 mm, 25 mm, 30…
🔥 UPDATE: V2 NOW AVAILABLE! An improved version (V2) featuring new side-grip grooves for better control is now out! 👉 Get the new V2 version here: This is a bed scraper / print removal tool designed to safely and efficiently remove prints…
3D Printable Screw Generator for Fusion 360 This is a fully editable Fusion 360 file designed to generate screws specifically optimized for 3D printing. Most standard metric threads are designed for metal manufacturing, not for FDM…
If there is any other type of screw/bolt you need modeled please message me
This model was missing from Printable so I upload with credit to the original creator under Creative Commons.
These screw holders hold a screw in front of a drill, and automatically release it once the screw head starts to enter the material. I recommend printing these from PETG or a stiff TPU e.g solid 68D Inspired and improved version of this…
Skyscraper modeled onscreen on YouTube. I used PLA, 0,10 mm layer height and 0.4 mm nozzle. You dont have to use any supports and 5 % infill is fine. In this configuration, it will take roughly 17 hours to print.
If you like this kind of stuff please check my patreon page www.patreon.com/wekster
The PocketDriver is a sleek and practical EDC bit driver designed to hold up to 4 bits within its body. Help me create more FREE models! If you like the stuff I create, consider joining my printables club as a supporter. It makes a world…
Make sure to choose the correct plate version for your funnel (plate_GC_revised or plate_GCP_revised) Fasteners (to attach touchscreen housing): 2 M4x10 button-head screws 2 M4 nuts Loctite 242/243 or equivalent Recommended Print…
Expectations: Don't expect a screw that is strong as its metal counterpart, but i will do the job for low stress application. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: 5mm/s or lower…
This Multi-Size Hex Handle Scrapper Set is a practical and versatile tool designed for various scraping needs. Featuring three sizes—Wide, Normal, and Narrow—this set is ideal for tasks ranging from cleaning 3D printer beds to general…
My wife asked me to make a holder for the scrub daddy sponge and this is the result. It sits on the side of the sink with an outlet for the water New version here with print in place jointed legs…
New Version out now (metric and imperial) Keep your allen keys organized and turn them into a handy screwdriver! Head of screwdriver (black part) can rotate free for even more comfort. Note: You will need to warm up allen key with a…
Please give it a ❤ if you like it 🥰 Here are from belt tensioner for the Creality Ender 3 design to re-use the stock screws. Video talking about it (FR): Everything can be printed without support but some z-hop while moving may be…
The 5 holders "tight" version is the most space effective. If you want more space in between, then the other versions are c.t.c. 40 mm like the holes in the Skadis board.
This modular scraper is designed especially for 3D printer bed cleaning – perfect for removing filament residue, glue, or adhesion products from the build surface. It can be used with a standard Stanley blade or with various 3D‑printed…
Anyone who has a Bambu has a love/hate relationship with the Scraper tool. It's awesome. But it sucks because they give you a magnet for it that has to be the weakest magnet known to man. Plus is a aluminum printer… so? Anyway, the…
I really like the Prusa spatula for its aesthetics and low filament consumption, but it could still be better. Enter the Prusa printbed scraper 2.0. I've reduced the material even more by cutting out triangular sections in the handle and…
Maj 30/06/24 : https://www.printables.com/model/927111-anti-pluie-piege-anti-frelon addition test piece anti rain hat suspension Part to test because no more printer working at the moment... fixing with petg wire as attachement Thanks in…
BEST PRINTED WITH PETG I modelled this in Blender while making sure it can function when printed. All you need is glue to glue the two hinge parts together while inside the handle and blade. It should take around 4-5 hours for 100% infill…
Get the other engines here ! Get the screwdriver here ! Build Video/Instruction Print the weights at a higher infill percentage to actually give them weight (I used 70-80% infill on the weights). This entire print is around 180g of…
I found a high number of measuring tools for metric screws. But what about a measuring tool for inch screws, nuts and wrenches? I couldn't find any, so I created one, or better two :-) The tool is created for UNC and UNF threads and…
This is a Screwless, parametric, sealed, storage box. The Alround Box MINI: https://www.printables.com/de/model/851837-rugged-storage-box-mini-parametric-screwless The box is assembeld with pieces of filament, so screws arn't needed…
An improved version of this model is available at: Hundreds of Metric Hex Screws Version 2 The screws are inspired by DIN 933 / ISO 4017 metric screws with hexagonal head and long threads. The standard screw design has been slightly…
PLEASE UPDATE YOUR FILES to ensure the best fit. ( updated 1/10/23 ) Stronger Handle and simpler labeling for less mistakes. 49 hours too much? Try 60% version→…
Expectations: Don't expect a screw that is strong as its metal counterpart, but it will do the job for low stress applications. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 5mm/s…
The Micro SD Ejector is great, but I kept losing it because it's small. I Used Tinkercad (because I'm a simpleton) to add the ejector to the scraper. Printed at .12mm and 3 walls, takes 18 minutes and uses 3.79g of filament.
I was about to make the beloved hex scraper (since the one that came preloaded on my X1C was kinda garbage) but I thought to myself why should I print a nice scraper if I'll have to print a full one again every time the blade goes bad.…
My wife asked me to make a holder for the scrub daddy sponge and this is the result. It sits on the side of the sink with an outlet for the water This is a new design with print in place jointed legs, in the original the legs clipped on…
There is one main screen housing design, multiple mounting options. The Front mount is compact and needs fewer parts but is at a fixed angle and can be low for taller people. The Rear mount takes up more space and uses more parts, but the…
This is to help you get that perfect first layer and determine where you need to make adjustments on your 430x430 bed. This will work with any 3D Printer. Just scale to size of your printer. The pattern was modeled after bed screws on…
Simple printbed scraper with Flashforge logo. Must have tool to remove stubborn prints and/or purge lines from the printbed. Layer height:0.12 Shells/walls: 3 Infill: 15%
This is a low-profile bed scraper designed for safely removing 3D prints from build plates. The ergonomic handle provides a comfortable grip while allowing precise control during print removal. The scraper features a wide, thin blade that…
The M4 screws (which includes a nut) were CADed with the intent of being able to use them in low-stress situations. The screws should be similar to the goBILDA M4 screws, which you can use interchangeably with these 3D-printed screws, as…
A useful tool for removing prints from the bed with interchangeable 3D printable blades for when one eventually wears out. You can print the body in either PLA or PETG, however for the blade PLA is highly reccomended. To install the…
![[Use M3 screws] Spool holder for Prusa MINI Flexible](https://media.printables.com/media/prints/62910/images/657225_6e3e876b-c636-4d75-9a4a-d73aa241cde4/ming-cheng-wei-she-ding-3.png)
