Magnetic NozzleCleaner and Bed endstops for Voron 2.4
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Silicone brush holder to clean your nozzle, magnetic trash can and end stops for sheet positioning in a stealth design
- Rating
- 5 / 5
- Likes
- 47
- Downloads
- 136
- Makes
- 2
- Views
- 853
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my version of the silicone brush nozzle holder for Voron 2.4. Its combined with a magnetic filament trash can and the option to use thermally decoupled bed sheet end stops for easy bed positioning.
Make sure your printer bed is moved forward as much as possible to allow the nozzle to reach the silicone brush for cleaning.
Use Voron print settings and a heat resistant material like ABS or ASA. I think PETG would be fine too.
Installation Tip
- Start with the bedsheet endstops.
- Fasten them loosely.
- Adjust the bedsheet screws to the height of the aluminum heater bed.
- Push the endstops to the aluminum bed and fasten them.
- Adjust the bedsheet screws just above the height of the bedsheet.
- Install the bedsheet and double-check the positions.
- Install the filament waste box.
- Attach the magnetic holder of the box loosely
- Push it with the waste box to the front
- Remove it again, trying not to move the magnetic holder
- Fasten the magnetic holder and double-check.
Needed materials
- 4x 6x3mm magnets
- 1x Nozzle Silicone Brush (e.g. from fysetc)
- 2x M3 Insert Nuts
- 2x M3x8 SCHS Screws
- 2x M3x16 SCHS Screws
Love my 3D models?
If my designs have helped you print something awesome or inspired your next project, consider supporting my work! Your kindness fuels my creativity, keeps the filament rolling, and helps me share even more free/pay-what-you-want models in the future. Every coffee counts!