1 / 6
ImpulseRC Apex Evo - Gemini Dual/Cross Band  - 04 air unit - XT60 - Mount — image 1
1 / 6

ImpulseRC Apex Evo - Gemini Dual/Cross Band - 04 air unit - XT60 - Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Mount Designed to hold the dual antennas from the 04 air unit, both Gemini Cross band antenna, the xr4 Receiver + XT60

Rating
0 / 5
Likes
3
Downloads
53
Makes
0
Views
470
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

I bought an overkill receiver and decided to find away to add it all onto my Apex Exo DC it will also fit the standard Apex Evo or most quads with 32mm rear standoffs.

To Print you only need supports on the very bottom, everything else prints fine.

To assemble, Install the XT60 First - you may need pilers to push this in from the underside - its a very tight squeeze.

Install Gemini Antenna, you will need to bend these to get them in or you could cut the print around the circular holes.

Install 04 antenna 

Install XR4 receiver, with the bind button facing the bottom of the quad - There is a ledge for this to rest on which will prevent the bind button from being pressed during flight/crashes

Slide mount onto the Standoffs

Took loose wires into mount.

Yes, this is completely overkill - no, most people wont need it - yes, the antenna would be better front and rear or at an angle to each other but this works without having to run extensions to the front of the quad. I'm also not using it for stupid amounts of range, although ill still get that. I'm using this setup for noisy Environments, it suits my needs, it may suit someone else's.