DJI Neo transport case with TPU Pads
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 'reinforced' transport case with TPU pads for extre protection.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 19
- Makes
- 0
- Views
- 578
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
This is a 'reinforced' transport case with TPU pads for extre protection.
The following parts shall be printed with flexible filament:
- Flex.stl
- dockingPad_lower.stl
- dockingPad_upper.stl
I printed them with 2 perimetes & 20% infill and I find the flex/stiffness ration perfect to hold the drone in place in the box while absorbing some shocks.
Feel free to adjust
The reamining parts can be printed with the filament of your choice. I recomment PTEG due to its higher temperature resistance.
For assembly, the ‘lowerBox’ has 4 hole on the outter walls for ‘short’ M5 heat set inserts. Then the inside of the ‘lowerBox’ and ‘upperBox’ have two hole for M3 inserts in the center of the honeycomb structure.
Assembly:
- Set the M5 & M3 inserts into place.
- Using qty 2 M3x8mm bolts, fastens the docing pads to their respective box
- Install qty 4 M5x8mm bolts on the outside of the ‘lowerBox’. Make sure to let the bolts loose as the will hold the ‘flex’ stip to close the box (Ref. to the pictures).
I included the freeCAD original file, happy printing :)