1 / 15
DJI Neo transport case with TPU Pads — zdjęcie 1
1 / 15

DJI Neo transport case with TPU Pads

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a 'reinforced' transport case with TPU pads for extre protection.

Ocena
0 / 5
Polubienia
4
Pobrania
19
Wydruki
0
Wyświetlenia
578
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution

This is a 'reinforced' transport case with TPU pads for extre protection.

The following parts shall be printed with flexible filament:
- Flex.stl
- dockingPad_lower.stl
- dockingPad_upper.stl
I printed them with 2 perimetes & 20% infill and I find the flex/stiffness ration perfect to hold the drone in place in the box while absorbing some shocks. 
Feel free to adjust

The reamining parts can be printed with the filament of your choice. I recomment PTEG due to its higher temperature resistance.

For assembly, the ‘lowerBox’ has 4 hole on the outter walls for ‘short’ M5 heat set inserts. Then the inside of the ‘lowerBox’ and ‘upperBox’ have two hole for M3 inserts in the center of the honeycomb structure.
Assembly:
- Set the M5 & M3 inserts into place.
- Using qty 2 M3x8mm bolts, fastens the docing pads to their respective box
- Install qty 4 M5x8mm bolts on the outside of the ‘lowerBox’. Make sure to let the bolts loose as the will hold the ‘flex’ stip to close the box (Ref. to the pictures).

I included the freeCAD original file, happy printing :)

Tagi