[IKEA SKADIS] Kabelmeister power strip mounting plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting plate for a power strip (model no. SL013-U015O) from Kabelmeister
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 13
- Makes
- 0
- Views
- 276
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
This is a mounting plate for a power strip from Kabelmeister.
I wanted a power strip with 3 outlets and some USB ports for my bathrom. In other rooms I use KOPPLA power strips for this purpose. But in an environment of a bath room with its high humidity I wanted a more waterproof solution. Therefore I go with a powerstrip from Kabelmeister ( P/NO: “SL013-U015O” ).
For mounting the plates to the SKADIS board you need some T-Nut. I used the https://www.printables.com/model/1156750-t-nut-for-skadis-board-interference-threaded
Per plate you need:
- Mounting the plate:
- 4x T-Nut
- 4x countersunk head screw (black, TORX - DIN965): M3x12mm
- Mounting the power strip:
- 2x countersunk head screw (A2, TORX - DIN7991): M5x16mm
- 2x flat hex nut (A2, DIN439): M5
- 2x hex nut (A2, DIN934): M5