1 / 6
[IKEA SKADIS] Kabelmeister power strip mounting plate — zdjęcie 1
1 / 6

[IKEA SKADIS] Kabelmeister power strip mounting plate

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mounting plate for a power strip (model no. SL013-U015O) from Kabelmeister

Ocena
0 / 5
Polubienia
4
Pobrania
13
Wydruki
0
Wyświetlenia
276
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial

This is a mounting plate for a power strip from Kabelmeister.

I wanted a power strip with 3 outlets and some USB ports for my bathrom. In other rooms I use KOPPLA power strips for this purpose. But in an environment of a bath room with its high humidity I wanted a more waterproof solution. Therefore I go with a powerstrip from Kabelmeister ( P/NO: “SL013-U015O” ).

For mounting the plates to the SKADIS board you need some T-Nut. I used the https://www.printables.com/model/1156750-t-nut-for-skadis-board-interference-threaded

Per plate you need:

  • Mounting the plate:
    • 4x T-Nut
    • 4x countersunk head screw (black, TORX - DIN965): M3x12mm
  • Mounting the power strip:
    • 2x countersunk head screw  (A2, TORX - DIN7991): M5x16mm
    • 2x flat hex nut (A2, DIN439): M5
    • 2x hex nut (A2, DIN934): M5

Tagi