Kärcher NT 2.0 to DeWalt adaptor set
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two adaptors to connect a DeWalt cyclone dust separator DXVCS003 to a Kärcher Professional NT vacuum
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 66
- Makes
- 0
- Views
- 657
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This set of two adaptors facilitates the connection of a DeWalt cyclone dust separator DXVCS003 (or DXVCS002 or DXVCS001) to a Kärcher Professional vacuum with NT Bajonet 2.0 like Kärcher NT 30/1.
The (~2m) DeWalt hose is used to connect the cyclone with the vacuum. Therefore, the DeWaltHose to KaercherNT2_0 Bajonet v1 is used.
- Print the adaptor. I used ABS with 5 walls and 20% gyroid infill.
- Buy a Adapter für NT-Schläuche mit Bajonettverbindung 1.0 (5.031-436.0)
- Hot glue the two parts together
The longer Kärcher hose is connected to the cyclone intake with the KaercherNT2_0 to DeWalt v3 adaptor. Therefore, you can use all the Kärcher tools / adaptors.
Electrical conductiveness was not taken into account. There might be static electricity builing up, when using this adaptor set. Perhaps you find a conductive filament?