Kärcher NT 2.0 to DeWalt adaptor set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two adaptors to connect a DeWalt cyclone dust separator DXVCS003 to a Kärcher Professional NT vacuum
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 647
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This set of two adaptors facilitates the connection of a DeWalt cyclone dust separator DXVCS003 (or DXVCS002 or DXVCS001) to a Kärcher Professional vacuum with NT Bajonet 2.0 like Kärcher NT 30/1.
The (~2m) DeWalt hose is used to connect the cyclone with the vacuum. Therefore, the DeWaltHose to KaercherNT2_0 Bajonet v1 is used.
- Print the adaptor. I used ABS with 5 walls and 20% gyroid infill.
- Buy a Adapter für NT-Schläuche mit Bajonettverbindung 1.0 (5.031-436.0)
- Hot glue the two parts together
The longer Kärcher hose is connected to the cyclone intake with the KaercherNT2_0 to DeWalt v3 adaptor. Therefore, you can use all the Kärcher tools / adaptors.
Electrical conductiveness was not taken into account. There might be static electricity builing up, when using this adaptor set. Perhaps you find a conductive filament?